The following lines were added (+) and removed (-):
* '''Record''' – In this case continuous events of a fixed length are generated regardless of motion which is analogous to a convention time-lapse video recorder. No motion detection takes place in this mode. * '''Record''' – In this case continuous events of a fixed length are generated regardless of motion which is analogous to a convention time-lapse video recorder. No [[motion detection]] takes place in this mode. * '''Nodect''' – or No DEteCTtion. This is a special mode designed to be used with external triggers. In Nodect no motion detection takes place but events are recorded if external triggers require it.* '''Nodect''' – or No DEteCTtion. This is a special mode designed to be used with external triggers. In Nodect no [[motion detection]] takes place but events are recorded if external triggers require it.=== Zones ====== [http://www.zoneminder.com/wiki/index.php/Documentation#Defining_Zones Zones] ====== Parameters ===* Min/Max Pixel Threshold -* Filter Width/Height - this filter removes any tiny or discontinuous pixels that don't form part of a discrete block.* Min/Max Alarmed Area - the minimum and maximum number of pixels that exceed this threshold that would cause an alarm.* Min/Max Filtered Area - * Min/Max Blob Area - only the Minimum is likely to be very useful.* Min/Max Blobs - the limits of the actual number of blobs detected.