The following lines were added (+) and removed (-):
* Motion detection * [[Motion Detection]] * A note on motion detection recording: Unlike Pico2000, if there is further motion detected during the recording interval, the software will continue to record. Once triggered, recording will continue for the duration set or longer if motion persists.* A note on [[motion detection]] recording: Unlike Pico2000, if there is further motion detected during the recording interval, the software will continue to record. Once triggered, recording will continue for the duration set or longer if motion persists.* motion activated record note: After recording stops the entire screen seems to flicker activating 100% motion detection and triggering continuous recording. It was necessary to increase the "Drop the first X frames" to a value of 12-15.* motion activated record note: After recording stops the entire screen seems to flicker activating 100% [[motion detection]] and triggering continuous recording. It was necessary to increase the "Drop the first X frames" to a value of 12-15.This is a jumping of the image up and down that is minor, at approx 1 line of resolution, yet enough to trigger motion detection. This condition is a result of the poor quality of the inexpensive [[Pico UCC4 Conexant 878A 4-port PCI DVR Card]] and there is no known resolution found currently.This is a jumping of the image up and down that is minor, at approx 1 line of resolution, yet enough to trigger [[motion detection]]. This condition is a result of the poor quality of the inexpensive [[Pico UCC4 Conexant 878A 4-port PCI DVR Card]] and there is no known resolution found currently.