View source for Kenwood TM-241A

From Free Knowledge Base- The DUCK Project: information for everyone

← Kenwood TM-241A

You do not have permission to edit this page, for the following reason:

---

You can view and copy the source of this page:

== VFO Control == === Select CTCSS Tone === # Long-press the F key. The F indicator will flash. # Press the TONE/T.ALT button # Turn dial to select PL tone. # Once correct tone selected, short-press F key to accept. == Programming == # Press the [VFO] key to select the VFO operating mode # Select the frequency, tone, offset # Press the [F] key. The [F] indicator and a channel memory number will be displayed. # Select the memory channel to store the frequency in. # Press the [MR/M] button within 10 seconds. If you hear a long beep, and the F indicator and channel indicator go away then the program was successful. [[Category:Electronics]] [[Category:Radio]] [[Category:Ham Radio]] [[Category:2-Way Radio]] [[Category:Tangible Product]] [[Category:Transceiver]]

Return to Kenwood TM-241A.