View source for Kenwood TR-7400A

From Free Knowledge Base- The DUCK Project: information for everyone

← Kenwood TR-7400A

You do not have permission to edit this page, for the following reason:

---

You can view and copy the source of this page:

The Kenwood TR-7400A is a digitally synthesized high performance, 2 meter mobile FM transceiver. It features a full frequency digital LED display. Transmit power may be set for 5 or 25 watts. Frequency range is 144 - 147.995 MHz. 7.3 x 2.875 x 10.6 inches 6.2 lbs. Requires 13.8 VDC at 8 amps. Comes with hand mic (4 pin), mobile mounting bracket and DC cord. The TR-7400A has provisions for continuous tone-coded squelch (CTCS); encode and decode or encode only. Common frequency active filters are available (optional). Also, tone burst operation can be achieved by inserting optional tone burst modules(TBM).Standard frequency modules are available at your KENWOOD dealer. Of course, the TR-7400A can be used for normal carrier squelch operation. A convenient, front panel switch selects the squelch system you desire. This versatile, self-contained squelch system allows the TR-7400A user to "access" any of his favorite repeaters. High Power, Solid State Final: The KENWOOD TR-7400A is conservatively rated at 25 Watts RF output power to provide solid, reliable communications. High performance and reliability are obtained through the use of the Motorola MRF-208 (driver) and 2N6083 (final) transistors mounted on a large die cast heat sink. Details: Requires addon tone board for PL repeater use, band pass front end on RX, no wideband, and no out of band mods. [[Category:Electronics]] [[Category:Radio]] [[Category:Ham Radio]] [[Category:2-Way Radio]] [[Category:Tangible Product]]

Return to Kenwood TR-7400A.