View source for D-Link DAP-1350 Wireless-N Pocket Router

The D-Link Model DAP-1350 Wireless N Pocket Router / Access Point  / Client is a 3-in-1 Wi-Fi Device.  It features multi-mode functionality you can utilize as a wireless router to create an 11n Wi-Fi network or use as an access point to add Wi-Fi to an existing wired network. The DAP-1350 also functions as a wireless client to connect an Ethernet-ready device to a Wi-Fi network.

It is designed for portability, it can travel with you.  It is compact and lightweight and equipped with a travel case.

Support for WPA and WPA2 wireless security.

This Wireless N Pocket Router/Access Point uses Wireless N technology with multiple intelligent antennas to maximize the speed and range of your wireless signal to significantly outperform Wireless G devices. The internal antennas bounce multiple wireless signals off walls and ceilings to work around obstructions and help eliminate dead spots.

Features

* Multi-mode functionality with wireless router, access point, or wireless client mode
* Backward compatible with Wireless G devices
* Supports Power over USB allowing a PC to power the DAP-1350 if AC power is not accessible
* Secure wireless using WPA or WPA2 encryption

== Support and Documentation ==

* D-Link Site, [http://www.dlink.com/dap-1350 DAP-1350 Wireless N Pocket Router & Access Point]
* D-Link Site, [http://www.dlink.com/products/default.aspx?pid=DAP-1350&tab=3 Support Resources]

=== Setup Defaults ===

The device default IP address is: 192.168.0.50
The default username and password is: admin / -blank-

For Router mode, you must connect using your wireless adapter. the Ethernet port will not allow access to the web 
based configuration utility.

&nbsp;

&nbsp;

[[Category:Computer_Technology]]
[[Category:Networking]]
[[Category:WiFi]]
[[Category:Radio]]