M-Audio Fast Track Pro: Difference between revisions

From Free Knowledge Base- The DUCK Project
Jump to navigation Jump to search
Created page with " == Two Amplifier Configuration == Problem: even though outputs 1&2 as well as outputs 3&4 are selected, audio is not received by both amplifiers."
 
 
(3 intermediate revisions by the same user not shown)
Line 4: Line 4:


Problem: even though outputs 1&2 as well as outputs 3&4 are selected, audio is not received by both amplifiers.
Problem: even though outputs 1&2 as well as outputs 3&4 are selected, audio is not received by both amplifiers.
[[File:maudiofasttrackpro01.png]]
Control Panel
+---Sounds and Audio Devices
    +---Audio
        "Sound and Playback Devices"
            Fast Track Pro Out 1/2
            RealTek HD (or whatever onboard)
            Fast Track Pro Out 3/4
and in the M-Audio U/I
[[File:maudiofasttrackpro02.png]]
How does the user select both 1/2 and 3/4 so sound goes out all channels (necessary for L&R amp 1 and L&R amp 2 ?
There is currently no known solution.  It seems to be a limitation.
Workaround: connect the second amp to the headphone out on the front of the M-Audio Fast Track Pro.  Make sure A/B button is OUT.
Additional Comments:  If your DJ software supports output to both 1/2 and 3/4 and can mix the channels, you can accomplish it with software.  Windows will not do it for software that does not support the extra channels.  It is a feature of the sound device that has to be specifically supported by software.
 
[[Category:Computer Technology]]
[[Category:Hardware]]
[[Category:Electronics]]

Latest revision as of 11:57, 11 April 2014


Two Amplifier Configuration

Problem: even though outputs 1&2 as well as outputs 3&4 are selected, audio is not received by both amplifiers. 

Control Panel
+---Sounds and Audio Devices
    +---Audio
        "Sound and Playback Devices"
           Fast Track Pro Out 1/2
           RealTek HD (or whatever onboard)
           Fast Track Pro Out 3/4

and in the M-Audio U/I

How does the user select both 1/2 and 3/4 so sound goes out all channels (necessary for L&R amp 1 and L&R amp 2 ?

There is currently no known solution. It seems to be a limitation.

Workaround: connect the second amp to the headphone out on the front of the M-Audio Fast Track Pro. Make sure A/B button is OUT.

Additional Comments: If your DJ software supports output to both 1/2 and 3/4 and can mix the channels, you can accomplish it with software. Windows will not do it for software that does not support the extra channels. It is a feature of the sound device that has to be specifically supported by software.

 

Retrieved from "http://wiki.robotz.com/index.php?title=M-Audio_Fast_Track_Pro&oldid=8727"