The following lines were added (+) and removed (-):
== More on using netsh to fix limited connectivity ==The following is a list of the Netsh commands with descriptions that you can use to reset your network adapter in Windows 10: netsh advfirewall resetRestores the Windows Firewall with Advanced Security policy to the default policy. The current active policy can be optionally exported to a specified file. In a Group Policy object, this command returns all settings to not configured and deletes all connection security and firewall rules. netsh int ip resetRemoves all user configured IPv4 (Internet Protocol version 4) settings. Restarting computer is required before the default settings will take effect. netsh int ipv6 resetRemoves all user configured IPv6 (Internet Protocol version 6) settings. Restarting computer is required before the default settings will take effect. netsh winsock resetResets Winsock Catalog to a clean state. All Winsock Layered Service Providers which were previously installed must be reinstalled. This command does not affect Winsock Name Space Provider entries.=== more ===Run this command in an elevated Command Prompt to reset the Windows TCP/IP stack to its original state, a step that often fixes lots of network related issues: netsh int ip reset C:\logreset.txtHere are some other netsh commands you can try if resetting the network adapter didn't fix the network error. netsh int tcp set heuristics disabled netsh int tcp set global autotuninglevel=disabled netsh int tcp set global rss=enabledThen, run this command to verify that the settings were disabled: netsh int tcp show globalsource: https://www.lifewire.com/resolve-connectivity-errors-in-windows-818232=== more ===Open an admin-level command prompt in Desktop mode, type the following commands, and hit Enter after each command: netsh int tcp set heuristics disabled netsh int tcp set global autotuninglevel=disabled netsh int tcp set global rss=enabledThen type the following and hit Enter, to verify that practically all the settings are disabled. netsh int tcp show globalFinally, reboot your machine and see if this helps.You may also try this:Open Command Prompt as Administrator and run the following commands sc config licensemanager type=ownRestart the computer and see if it has helped.