Difference between revisions of "Palomar Elite 450HD"
From Free Knowledge Base- The DUCK Project: information for everyone
(Created page with "Radio Amplifier for the 10 - 12 meter bands. Class AB Biased SSB with Preamp. AM/FM/SSB 3 Power Levels 12 VDC Input power: 10 Watt Dead key 80 Watt Swing Drive on AM Input p...") |
|||
| Line 2: | Line 2: | ||
Class AB Biased SSB with Preamp. | Class AB Biased SSB with Preamp. | ||
| + | |||
| + | [[Image:palomarelite450hd.jpg]] | ||
AM/FM/SSB 3 Power Levels 12 VDC Input power: 10 Watt Dead key 80 Watt Swing Drive on AM Input power: SSB 0-80 Watt 25 db Preamp AM/SSB AUTOMATIC INTERNAL SWITCH LED INDICATORS FOR Power ON/OFF - Pre-Amp On/Off - Power Output OUTPUT 400 PEP AVERAGE | AM/FM/SSB 3 Power Levels 12 VDC Input power: 10 Watt Dead key 80 Watt Swing Drive on AM Input power: SSB 0-80 Watt 25 db Preamp AM/SSB AUTOMATIC INTERNAL SWITCH LED INDICATORS FOR Power ON/OFF - Pre-Amp On/Off - Power Output OUTPUT 400 PEP AVERAGE | ||
Revision as of 16:45, 22 November 2016
Radio Amplifier for the 10 - 12 meter bands.
Class AB Biased SSB with Preamp.
AM/FM/SSB 3 Power Levels 12 VDC Input power: 10 Watt Dead key 80 Watt Swing Drive on AM Input power: SSB 0-80 Watt 25 db Preamp AM/SSB AUTOMATIC INTERNAL SWITCH LED INDICATORS FOR Power ON/OFF - Pre-Amp On/Off - Power Output OUTPUT 400 PEP AVERAGE
Requires a power supply with output of 40-50 AMPS.
It is a violation of US FCC regulations to operate these units on the Citizens Band Service in the United States.
SWR of 1.2 Or LESS down to 24 MHZ and up to 31.999 with a 1500 watt Dummy Load.
- 25 db Preamp
- This device requires 8-12 watts Dead Key and 20 Watts continuous / 30 watts max to reach its high performance output.
- 4 - 2290 Transistors
- Power Output Max 400-500 watts
- LED INDICATORS FOR Power ON/OFF - Pre-Amp On/Off - Power Output
- hi-med-low switch
- Size - 7" X 6 5/8" X 3"
- SSB Delay triggered by rf
- CURRENT REQUIREMANTS: 40-50 AMPS
