Difference between revisions of "Kenwood TM-241A"
From Free Knowledge Base- The DUCK Project: information for everyone
(Created page with " == Programming == # Press the VFM/M>V key to select the VFO operating mode # Select the frequency, tone, offset # Press the F key. The F indicator and a channel memory nu...") |
|||
| Line 1: | Line 1: | ||
| + | == VFO Control == | ||
| + | === Select CTCSS Tone === | ||
| + | # Long-press the F key. The F indicator will flash. | ||
| + | # Press the TONE/T.ALT button | ||
| + | # Turn dial to select PL tone. | ||
| + | # Once correct tone selected, short-press F key to accept. | ||
== Programming == | == Programming == | ||
Revision as of 21:56, 1 April 2017
VFO Control
Select CTCSS Tone
- Long-press the F key. The F indicator will flash.
- Press the TONE/T.ALT button
- Turn dial to select PL tone.
- Once correct tone selected, short-press F key to accept.
Programming
- Press the VFM/M>V key to select the VFO operating mode
- Select the frequency, tone, offset
- Press the F key. The F indicator and a channel memory number will be displayed.
- Select the memory channel to store the frequency in.
- Press the MR/M button within 10 seconds. If you hear a long beep, and the F indicator and channel indicator go away then the program was successful.
