The following lines were added (+) and removed (-):
Mode Keys: Pressing either of these keys momentarily will change the Operating mode.Home Key: Pressing this key momentarily recalls a favorite "HOME" frequency memory.Clar Key:Ant Jack:==Memory Channels==Normal Memory Storage1. Tune in the desired frequency, and set the operating mode and bandwidth. If this is anFM channel, set up any required CTCSS/DCS and repeater shift configurations. Standard (default) repeater shifts do not require you to utilize the "split" frequency memorytechnique.2. Press the [F] key momentarily, then rotate the [SEL] knob as needed until Operating Function Row 2 [ MW, MC, TAG ] appears on the display.3. Press the [A] key momentarily to enter the "Memory Check" mode, which is used to find an unused memory channel. The frequency stored (if any) on the current memory channel will be shown in the display.4. Rotate the [SEL] knob to select the channel number on which you wish to store the current frequency data.5. Press and hold in the [A](MW) for one second until you hear a double beep; the second beep confirms that the frequency information was successfully stored.