Difference between revisions of "Yaesu FT-7800R"
From Free Knowledge Base- The DUCK Project: information for everyone
(Created page with "===CTCSS Operation=== CTCSS setup involves two actions: setting the Tone Mode and then setting of the Tone Frequency. These actions are set up by using the [TONE(REV)] key and...") |
m (→CTCSS Operation) |
||
| Line 5: | Line 5: | ||
#Press the [ TONE ( REV )] key several times, so that "ENC" appears on the display | #Press the [ TONE ( REV )] key several times, so that "ENC" appears on the display | ||
| − | #press and hold in the [ BAND ( SET )] key for 1/2 second to enter the Set mode, then rotate the DIAL knob to select Menu #44 (TN FRQ). This Menu selection allows setting of the CTCSS tone frequency | + | #press and hold in the [ BAND ( SET )] key for 1/2 second to enter the Set mode, then rotate the DIAL knob to select Menu #44 (TN FRQ). This Menu selection allows setting of the CTCSS tone frequency. Press the [ BAND ( SET )] key momentarily to enable adjustment of the CTCSS frequency. Rotate the DIAL knob. |
Revision as of 20:58, 19 November 2017
CTCSS Operation
CTCSS setup involves two actions: setting the Tone Mode and then setting of the Tone Frequency. These actions are set up by using the [TONE(REV)] key and Set mode #44 (TN FRQ).
- Press the [ TONE ( REV )] key several times, so that "ENC" appears on the display
- press and hold in the [ BAND ( SET )] key for 1/2 second to enter the Set mode, then rotate the DIAL knob to select Menu #44 (TN FRQ). This Menu selection allows setting of the CTCSS tone frequency. Press the [ BAND ( SET )] key momentarily to enable adjustment of the CTCSS frequency. Rotate the DIAL knob.
