Difference between revisions of "Yaesu FT-7800R"
From Free Knowledge Base- The DUCK Project: information for everyone
m (→CTCSS Operation) |
m |
||
| Line 1: | Line 1: | ||
| + | ===Repeater Shift=== | ||
| + | 144 MHz shift will be 600 kHz, 70 cm, the shift is 5 MHz. ARS = Automatic Repeater Shift. | ||
| + | |||
| + | ARS Feature ON/OFF - hold in the [ BAND ( SET )] key and rotate the DIAL knob to select Menu #4 (ARS). Press the [ BAND ( SET )] key momentarily, then rotate the DIAL knob to enable or disable. Press the [ BAND ( SET )] key momentarily to save the new setting. | ||
| + | |||
| + | Manual Repeater Shift - | ||
| + | #Press and hold in the [ BAND ( SET )] key for 1/2 second to enter the Set mode. | ||
| + | #Rotate the DIAL knob to select Menu #33 (RPT.MOD). | ||
| + | #Press the [ BAND ( SET )] key momentarily, then rotate the DIAL knob to select the desired shift among "RPT.–," "RPT.+," and "RPT.OFF." | ||
| + | #Press the [ BAND ( SET )] key momentarily to save the new setting, then press and hold in the [ BAND ( SET )] key for 1/2 second to exit to normal peration. | ||
| + | |||
| + | |||
===CTCSS Operation=== | ===CTCSS Operation=== | ||
CTCSS setup involves two actions: setting the Tone Mode and then setting of the | CTCSS setup involves two actions: setting the Tone Mode and then setting of the | ||
Revision as of 21:11, 19 November 2017
Repeater Shift
144 MHz shift will be 600 kHz, 70 cm, the shift is 5 MHz. ARS = Automatic Repeater Shift.
ARS Feature ON/OFF - hold in the [ BAND ( SET )] key and rotate the DIAL knob to select Menu #4 (ARS). Press the [ BAND ( SET )] key momentarily, then rotate the DIAL knob to enable or disable. Press the [ BAND ( SET )] key momentarily to save the new setting.
Manual Repeater Shift -
- Press and hold in the [ BAND ( SET )] key for 1/2 second to enter the Set mode.
- Rotate the DIAL knob to select Menu #33 (RPT.MOD).
- Press the [ BAND ( SET )] key momentarily, then rotate the DIAL knob to select the desired shift among "RPT.–," "RPT.+," and "RPT.OFF."
- Press the [ BAND ( SET )] key momentarily to save the new setting, then press and hold in the [ BAND ( SET )] key for 1/2 second to exit to normal peration.
CTCSS Operation
CTCSS setup involves two actions: setting the Tone Mode and then setting of the Tone Frequency. These actions are set up by using the [TONE(REV)] key and Set mode #44 (TN FRQ).
- Press the [ TONE ( REV )] key several times, so that "ENC" appears on the display
- press and hold in the [ BAND ( SET )] key for 1/2 second to enter the Set mode, then rotate the DIAL knob to select Menu #44 (TN FRQ). This Menu selection allows setting of the CTCSS tone frequency. Press the [ BAND ( SET )] key momentarily to enable adjustment of the CTCSS frequency. Rotate the DIAL knob.
