Difference between revisions of "Cisco 678"
From Free Knowledge Base- The DUCK Project: information for everyone
(Created page with " == Switch the Cisco 678 from CAP to DMT == If you download the DMT firmware upgrade and follow the instructions EXACTLY you will get a working Cisco 678 with DMT that was previ...") |
|||
| Line 1: | Line 1: | ||
| − | |||
== Switch the Cisco 678 from CAP to DMT == | == Switch the Cisco 678 from CAP to DMT == | ||
If you download the DMT firmware upgrade and follow the instructions EXACTLY you will get a working Cisco 678 with DMT that was previously set at CAP. The setup commands for DMT are different than for CAP. | If you download the DMT firmware upgrade and follow the instructions EXACTLY you will get a working Cisco 678 with DMT that was previously set at CAP. The setup commands for DMT are different than for CAP. | ||
| + | |||
| + | The Cisco 677 and Cisco 678 allow you to choose transmission protocols to match your network configuration by changing the router's configuration file. Use TFTP to transfer files to and from a CPE. | ||
| + | |||
| + | See: [http://www.cisco.com/en/US/products/hw/modems/ps296/products_installation_guide_chapter09186a008007dd70.html#xtocid1095542 Configuration Procedures for the Cisco 67x - section Configure for DMT] | ||
| + | |||
| + | |||
| | ||
Revision as of 16:35, 11 August 2012
Switch the Cisco 678 from CAP to DMT
If you download the DMT firmware upgrade and follow the instructions EXACTLY you will get a working Cisco 678 with DMT that was previously set at CAP. The setup commands for DMT are different than for CAP.
The Cisco 677 and Cisco 678 allow you to choose transmission protocols to match your network configuration by changing the router's configuration file. Use TFTP to transfer files to and from a CPE.
See: Configuration Procedures for the Cisco 67x - section Configure for DMT
