Difference between revisions of "Uniden BCD325P2 TrunkTracker V Scanner"

Revision as of 20:14, 12 July 2023

APCO-25 Phase II capable handheld TrunkTracker V scanner. It is the replacement from the previous generation BCD396XT.

basic usage

• Press the knob at the top (E) to select Volume control function before turning to set volume.
• Press Func then press the top (E) knob to display the squelch level and set it.

field programming

When you see [ Press E ] it means to press down on the top turn dial.

For Conventional frequencies please follow these steps:

1. Press Menu button
2. Highlight Program System, Press E
3. Highlight New System, Press E
4. Highlight Conventional, Press E
5. Confirm by pressing E
6. Highlight Edit Group, Press E
7. Highlight New Group, Press E
8. Highlight Edit Channel, Press E
9. Highlight New Channel, Press E
10. Enter your Frequency, Press E
11. To enter more frequencies, Highlight New Channel, Press E

For P25 (Standard Trunk), Motorolla, Edacs, LTR:

1. Press Menu
2. Highlight Program System, Press E
3. Highlight New System, Press E
4. Highlight the system you need Conventional, P25, Motorolla, Edacs, LTR, Press E
5. If P25 (Standard Trunk), EDACS, or Motorolla please follow the steps below:
6. Highlight Edit Site, Press E
7. Highlight New Site, Press E
8. Highlight Set Frequencies, Press E
9. Highlight New Frequency, Press E
10. Type in Primary and Alternate Frequencies (red and blue frequencies on RadioReference) Press E
11. Highlight New Frequency to enter more, Press E

Once you have entered all of your frequencies and want to enter DEC/TGID:

• 12. Press Menu 4 times.
• 13. Highlight Edit Group, Press E
• 14. Highlight New Group, Press E
• 15. Highlight Edit Channel, Press E
• 16. Highlight New Channel, Press E
• 17. Enter in the DEC/TGID, Press E
• 18. To enter more DEC/TGID Highlight New Channel, Press E

Once you have finished entering the DEC/TGID

• 19. Press Menu 4 Times
• 20. Highlight Edit Sys Option, Press E
• 21. Highlight ID Scan/Search, Press E
• 22. Press E on ID Scan if using TGID's and ID Search if just using only Frequencies.

For P25 One Frequency Trunk:

1. Press Menu
2. Highlight Program System, Press E
3. Highlight New System, Press E
4. Highlight P25, Press E
5. Highlight One Freq Trunk, Press E
6. Highlight Edit Site, Press E
7. Highlight New Site, Press E
8. Highlight Set Frequencies, Press E
9. Highlight New Frequency, Press E
10. Enter the Frequency, Press E
11. Highlight New Frequency, Press E
12. Once you have all the Frequencies entered you can Press Scan