John Deere X320 Tractor Mower: Difference between revisions
Jump to navigation
Jump to search
Created page with "Deck Removal Mower Blade Removal: bolt on each of the 3 blades is 18mm and standard thread (not reverse thread). Turn counter clockwise to loosen and remove blade." |
No edit summary |
||
| Line 1: | Line 1: | ||
Deck Removal | Deck Removal: | ||
Mower Blade Removal: bolt on each of the 3 blades is 18mm and standard thread (not reverse thread). Turn counter clockwise to loosen and remove blade. | remember to lock the deck height in the FORWARD position. You typically lock in in the back or depressed position to bring hte deck all the way up. However, to remove pins and deck you need to have the lever all the way up as far as it will go and it also locks into this position. This prevents the deck holding arms below from retracting once the pins are removed as they are spring loaded. | ||
Mower Blade Removal: | |||
bolt on each of the 3 blades is 18mm and standard thread (not reverse thread). Turn counter clockwise to loosen and remove blade. | |||
Revision as of 10:12, 15 July 2025
Deck Removal:
remember to lock the deck height in the FORWARD position. You typically lock in in the back or depressed position to bring hte deck all the way up. However, to remove pins and deck you need to have the lever all the way up as far as it will go and it also locks into this position. This prevents the deck holding arms below from retracting once the pins are removed as they are spring loaded.
Mower Blade Removal:
bolt on each of the 3 blades is 18mm and standard thread (not reverse thread). Turn counter clockwise to loosen and remove blade.