John Deere X320 Tractor Mower

Engine Oil

The following John Deere oils are preferred: TURF-GARD

• 30 weight full synthetic

Transmission Fluid

• PLUS- 4

Deck Removal

remember to lock the deck height in the FORWARD position. You typically lock in in the back or depressed position to bring hte deck all the way up. However, to remove pins and deck you need to have the lever all the way up as far as it will go and it also locks into this position. This prevents the deck holding arms below from retracting once the pins are removed as they are spring loaded.

Mower Blade Removal

bolt on each of the 3 blades is 18mm and standard thread (not reverse thread). Turn counter clockwise to loosen and remove blade.

Belt

Clutch

This mower uses the Warner Electric MagStop Residential, TG-2000 and Commercial Clutch/Brake. The MagStop name comes from the permanent magnet brake (magnetic stopping) rather than conventional spring activated mechanical brakes.

• 5219-127 IS A REPLACEMENT FOR PART NUMBER 5219-62

• https://www.warnerptodirect.com/shop/pto-clutches/5219-127

Function Clutch / Brake          Voltage 12 VDC                     Rated Torque (lb-ft) 125
Rotation CCW                     Current Draw (Amps) 4.23           Resistance (Ohms) 2.84
Connection Type integral         Pulley/Flange OD (in) 5.2          Bore Diameter (in) 1
Mounting Standard                Weight (lbs) 11.6                  D-drive Number 807-0201 included with this clutch/brake
Cable Accessory not included     Manufacturers Part Numbers AM141536, AM134397 Replaces 5219-62

Starter Solenoid

John Deere Original Equipment Starter Motor #MIU12537

Reverse Blade Disengage

Dangerous Safety Overrides that you should not do (but I did):