The following lines were added (+) and removed (-):
Tuner* The following settings are for TESTING purposes only. You will not be able to view any programming since the satellites described below provide only scrambled signal. However, you WILL be able to do a basic test to ensure signal is being received. For information on purchasing programming see other section. Echostar 7(119W) Changed LNB type to OSC-DP Changed Transponder to 12239 Changed Diseqc to Port 1*Selected Blind Scan*Saved scan when doneTunerTuner: EchoStar 7 Echostar 8 (110W) LNB Type .......... OSC-DP Changed LNB type to OSC-DP LNB Frequency ..... 11250 Changed Diseqc to Port 2 22KHz ............. OFF*Selected Blind Scan LNB Power ......... ON*Saved scan when done Transponder ....... 12239 * Search Option ..... ALL Network Search .... ON DiSEqC ............ Port 1 Motor ............. Disable Legacy Switch ..... OFF Tuner: EchoStar 8,10 LNB Type .......... OSC-DP LNB Frequency ..... 11250 22KHz ............. OFF LNB Power ......... ON Transponder ....... 12224 * Search Option ..... ALL Network Search .... ON DiSEqC ............ Port 2 Motor ............. Disable Legacy Switch ..... OFF * or any active transponder on the satellite.