Difference between revisions of "Talk:Free to Air Satellite Testing"
From Free Knowledge Base- The DUCK Project: information for everyone
(Created page with "== OLD SETTINGS FOR CW EchoStar 7 (119W) and EchoStar 6,8 (110W) settings == These are the two main Dish Network birds. There are very few FTA...") |
(→Dish500 Settings for the Sonicview: new section) |
||
| Line 27: | Line 27: | ||
110: port 2 (for dish 500) Set the Diseqc the EchoStar 6,8 to Port 2 | 110: port 2 (for dish 500) Set the Diseqc the EchoStar 6,8 to Port 2 | ||
61.5: port 3 | 61.5: port 3 | ||
| + | |||
| + | == Dish500 Settings for the Sonicview == | ||
| + | |||
| + | source: http://www.purefta.com/forum/sonicview-360-elite-discussion-only/46985-antenna-settings-use-dish-500-sonicview-receiv.html | ||
| + | <pre> | ||
| + | Dish500 Settings for the Sonicview | ||
| + | Try the following settings: | ||
| + | |||
| + | Satellite:Echostar7 | ||
| + | LNB Power: ON | ||
| + | LNB Type:OCS-DP | ||
| + | LNB Frequency:11250 | ||
| + | Transponder: 12239 or any tp on that satellite | ||
| + | 22KHz:OFF | ||
| + | Search Option:ALL | ||
| + | Network Search On | ||
| + | DiSEqC: Port1 | ||
| + | Motor: Disable | ||
| + | Legacy Switch:Off | ||
| + | |||
| + | |||
| + | Satellite:Echostar 8,10 | ||
| + | LNB Power: ON | ||
| + | LNB Type:OCS-DP | ||
| + | LNB Frequency:11250 | ||
| + | Transponder: 12224 or any tp on that satellite | ||
| + | 22KHz:OFF | ||
| + | Search Option:ALL | ||
| + | Network Search On | ||
| + | DiSEqC: Port2 | ||
| + | Motor: Disable | ||
| + | Legacy Switch:Off | ||
| + | |||
| + | |||
| + | These settings may also work for you: | ||
| + | |||
| + | Satellite: Echostar7 | ||
| + | LNB Power: ON | ||
| + | LNB Type: Single | ||
| + | LNB Frequency: 11250 | ||
| + | Transponder: 12239 or any tp on that satellite | ||
| + | 22KHz: OFF | ||
| + | Search Option: ALL | ||
| + | Network Search: On | ||
| + | DiSEqC: Port1 | ||
| + | Motor: Disable | ||
| + | Legacy Switch: Off | ||
| + | |||
| + | |||
| + | Satellite: Echostar 8,10 | ||
| + | LNB Power: ON | ||
| + | LNB Type: Single | ||
| + | LNB Frequency: 11250 | ||
| + | Transponder: 12224 or any tp on that satellite | ||
| + | 22KHz: OFF | ||
| + | Search Option: ALL | ||
| + | Network Search: On | ||
| + | DiSEqC: Port2 | ||
| + | Motor: Disable | ||
| + | Legacy Switch: Off | ||
| + | </pre> | ||
Latest revision as of 23:57, 23 May 2011
Contents
OLD SETTINGS FOR CW EchoStar 7 (119W) and EchoStar 6,8 (110W) settings
These are the two main Dish Network birds. There are very few FTA "in the clear" channels on these birds. You can receive the NASA channel, and some Dish Network information channels only. However, for testing purposes, if you wish to lock onto them here is the information:
EchoStar 7 (119W)
Transponder - 12268 Transponder Freq - 11250 LNB Type - OCS-DP 22Khz - Off DiSEqC Number - LNB1 Legacy SW - None Motorized - None
EchoStar 6,8 (110W)
Transponder - 12224 Transponder Freq - 11250 LNB Type - OCS-DP 22Khz - Off DiSEqC Number - LNB2 Legacy SW - None Motorized - None
The "Dish 500" minidish is equiped with a DP Twin LNB. The typical Dish Network Diseqc's settings are:
119: port 1 (for dish 500) Set the Diseqc for EchoStar 7 to Port 1 110: port 2 (for dish 500) Set the Diseqc the EchoStar 6,8 to Port 2 61.5: port 3
Dish500 Settings for the Sonicview
Dish500 Settings for the Sonicview Try the following settings: Satellite:Echostar7 LNB Power: ON LNB Type:OCS-DP LNB Frequency:11250 Transponder: 12239 or any tp on that satellite 22KHz:OFF Search Option:ALL Network Search On DiSEqC: Port1 Motor: Disable Legacy Switch:Off Satellite:Echostar 8,10 LNB Power: ON LNB Type:OCS-DP LNB Frequency:11250 Transponder: 12224 or any tp on that satellite 22KHz:OFF Search Option:ALL Network Search On DiSEqC: Port2 Motor: Disable Legacy Switch:Off These settings may also work for you: Satellite: Echostar7 LNB Power: ON LNB Type: Single LNB Frequency: 11250 Transponder: 12239 or any tp on that satellite 22KHz: OFF Search Option: ALL Network Search: On DiSEqC: Port1 Motor: Disable Legacy Switch: Off Satellite: Echostar 8,10 LNB Power: ON LNB Type: Single LNB Frequency: 11250 Transponder: 12224 or any tp on that satellite 22KHz: OFF Search Option: ALL Network Search: On DiSEqC: Port2 Motor: Disable Legacy Switch: Off
