Difference between revisions of "Talk:TRRS Phono Plug"

From Free Knowledge Base- The DUCK Project: information for everyone
Jump to: navigation, search
(Okay to finally clarify this issue for all.: new section)
Line 14: Line 14:
 
Notes on radio Headsets connection - There are basically eight types of wiring harness for the headsets available ,they are determined by the type of plug wiring required for the radio transceiver.
 
Notes on radio Headsets connection - There are basically eight types of wiring harness for the headsets available ,they are determined by the type of plug wiring required for the radio transceiver.
 
* http://www.amalgamate2000.com/sales/notes_on_headsets.htm
 
* http://www.amalgamate2000.com/sales/notes_on_headsets.htm
 +
 +
Patching into Android music control - Here’s a look at the TRRS cable that Android phones use.
 +
* http://hackaday.com/2010/11/03/patching-into-android-music-control/
  
 
== Okay to finally clarify this issue for all. ==
 
== Okay to finally clarify this issue for all. ==

Revision as of 22:59, 30 January 2013

sources

Headset headphone microphone for mobile devices can have 2.5mm or 3.5mm plug in TRRS.

3.5mm TRRS to 3.5 TRRS Adapter for Select Phones - 3.5mm to 3.5mm TRRS adapter that reverses the microphone and ground pins

iPhone Compatible Wiring - The iPhone style wiring is also compatible with the following devices (Partial list):

Phandroid - Accessory wired earbuds with mic

Notes on radio Headsets connection - There are basically eight types of wiring harness for the headsets available ,they are determined by the type of plug wiring required for the radio transceiver.

Patching into Android music control - Here’s a look at the TRRS cable that Android phones use.

Okay to finally clarify this issue for all.

In all of these explanations- imagine that the headphone plug is facing right (ie -->) Connection types for headphones with volume controls, and a mic are labeled as TRRS. The original 3.5mm headphones (for the first ipods etc) used TRS- Tip, Ring, Sleeve- from left to right, Left Audio, Right Audio, Ground.

On TRRS there are 2 types- the original TRRS configuration was produced by Nokia and has a pinout of Left Audio, Right Audio, Mic, Ground.

Apple came along and in typical elitist fashion changed their pinout to Left Audio, Right Audio, Ground, Mic.

This is why many apple headsets will not work with android, because the last 2 connections, for Mic and Ground are switched. It also presents an issue with controls. The way that songs are skipped (forwards, backwards, and pause)comes through signals that are sent down the ground channel. The way that volume is increased/decreased happens through signals sent down the Mic channel. This is why- if you try a set of newer iPhone earbuds on the GSIII- as I have- the center button does nothing, but yet the volume up and volume down both pause tracks, and allow you to skip them!!

Apple has patents on their software that will interpret these signals- and in fact the resistances (the actual ohm resistance in-line on the controls- not to get scientific or anything are designed to work only with Apple products.

Hope this clarifies things up a bit