Dentron MT-2000A and MT-3000A

From Free Knowledge Base- The DUCK Project
Jump to navigation Jump to search

These are efficient antenna tuners capable of handling full legal limit power for use with amateur radio.

Inductor Guide

Inductor selection is a starting point for you to tune to resonance with your own antenna setup.

Dentron recommends setting both capacitor selectors (Transmitter Matching) and (Antenna matching) to setting 5 before trying to locate the correct inductor setting for the frequency. Watch for the highest noise/signal level on the S meter. When the best inductor is located then fine tune using the capacitance tuning dials.

The following guide is for an Inverted V 66 on each leg 

band       frequency    inductor      cap and ind select
-----------------------------------------------------------
160          1990          R          6.7, R, 5.0
 80          3980          K          4.0, K, 3.0          1:1
 60
 40
 20
 15
 10
-----------------------------------------------------------
Retrieved from "http://wiki.robotz.com/index.php?title=Dentron_MT-2000A_and_MT-3000A&oldid=14764"