Google Pixel

From Free Knowledge Base- The DUCK Project: information for everyone
Revision as of 15:50, 18 June 2019 by Ke0etz (Talk | contribs)

Jump to: navigation, search

The Google Pixel smartphone is made by a Chinese company called Huawei - the same Chinese company that the United States Government is investigating for spying for the Chinese government.

The Google Pixel first generation phone or known as the Pixel One is offered in two sizes

  • Pixel
  • Pixel XL

Google New Interface

The main interface controls are now very abstract and look like 1980s VCR buttons, except the play button is facing the wrong way.

  • backwards triangle (bottom left) - equivalent to "escape" or go back one step
  • VCR record circle (bottom center) - equivalent to "home" this used to be a meaningful house icon
  • VCR stop square (bottom right) - equivalent to "menu" or something like that, you get some menu icons and open tasks to select from
  • SWIPE UP from bottom of screen - This is the fourth main control. From the bottom of the screen swipe up to access all of your apps.

Millennials love meaningless and confusing abstract symbols which are counter-intuitive to every generation before them. Why did Google devs use VCR symbols for the new Android desktop? They've never seen a VCR before, they didn't even realize.

SWIPE UP Apps Menu is also known as the "hidden menu" since there is no indication that this menu even exists as it is not represented by any icon or message on the desktop. Again, millennial thinking required here.

Pre- Crack / Root Basics

To quickly get to the settings menu

  • Press SQUARE and the SETTINGS GEAR which is a white gear image in a blue circle at the bottom right of the screen.

To allow file copy via USB cable

  • In Settings choose "Connected Devices" then "USB" to control what the phone does when connected to the computer.

Bootloader / Fast Boot Mode

USES VOLUME DOWN AND POWER BUTTON ONLY

  1. make sure phone is turned off
  2. press and hold the Volume Down button for a couple seconds then keep holding and press the power button
  3. while in bootloader mode navigate with the volume up and down, and use the power button to Enter/Select

Successful when you see an image of a little green android robot on its back with a service panel open. There is also the text in a green arrow reading START near the power button, and in white text some general information about the device.

Root

Android Version 9
Patch June 5 2019

THE BIG PROBLEM - There are many guides on how to install TWRP, Magisk, and Root this phone. They are ALL HORRIBLE. None are complete, each having different problems including procedural errors, missing steps, and things that just completely do not work. By the time I successfully rooted this phone I could not remember exactly what steps I took and how I finally successfully completed the process. Therefore, the guide below is not clear and step by step. It will be improved in the future when I get the opportunity to root additional Pixel phones.

Softwares / Tools in play here

  • TWRP - this is a backup and boot utility that you will flash onto your phone. It is easy to install and works well.
  • Magisk Manager - this is an app that is supposed to make it easier to install Magisk and root your phone
  • Magisk - this is the app that needs to be installed to root your phone, it is a PITA to get installed.

Developer Options and USB Debugging

OEM unlocking

If you have a Verizon phone or a Pixel One that an OTA update has disabled your ability to activate OEM Unlocking, at of June 2019 (or perhaps in the future) it is still possible to crack the system and enable OEM unlocking, but it is a little tricky and takes patience. In fact, I had to repeat the entire process because the first time it failed to work, and the second time it finally worked and worked very well.

(soon a guide here, for now check out...)

When you boot your Pixel phone and see the following error message briefly displayed in orange text: 

Your device cant be checked for corruption.  Please lock the bootloader.

You did it! That is a good error message, it means they are not happy that you cracked YOUR phone that YOU own and THEY are trying to control. You now have your rights back!

Unlock the bootloader

(soon a guide here, for now check out...)

  • Unlock bootloader

installing tools for backup and root

There are a number of guides online many of which offer downloads for the necessary tools including TWRP and Magisk. They often offer them from unknown or their own server and they are often outdated versions. Do yourself a favor and get the latest versions from the developer sites.

TWRP 3.0.2 custom recovery https://www.teamandroid.com/2016/12/13/install-twrp-3-0-2-recovery-on-google-pixel-complete-guide/

download TWRP from https://twrp.me/Devices/Google/ choose Google Pixel (sailfish) -> https://dl.twrp.me/sailfish/ yields -> Download twrp-pixel-installer-sailfish-3.3.0-0.zip

download MagiskManager-v7.2.0.apk from https://magiskmanager.com/

error: /snap/core/xxxx read-only filesystem error

SKIP IF YOU DID NOT GET THIS ERROR

  • on phone goto settings -> connected devices -> USB
  • set to USB controlled by [x] this device
  • set to Use USB for [x] File Transfer

You will copy TWRP to a directory that appears something like this in your file manager

  • /run/user/1000/gvfs/mtp:host=%5Busb%3xxxxxxxxxx/Internal shared storage

I used SpaceFM file manager to copy the file from the computer to the Android phone. The read-only error was resolved by ensuring that the USB settings on the phone were set to "Use USB for File Transfer"

reboot to Recovery Mode and install Image

You should have Downloaded both the img and the zip. Copy the zip to your device. You will need to have fastboot binaries and the correct drivers installed.

Disconnect data cable and have the device off. Power off your device completely.

Hold volume down and turn on the device. Your device should now be in the bootloader. Connect the device to your PC. Open a command window and run the following command from the proper location: 

fastboot boot ./twrp.img

This will temporarily boot TWRP on your device.

Go to install and browse to the zip and install the zip. The zip will install TWRP to both boot slots.

We are going to boot the phone in bootloader mode and from the bootloader screen select Recovery.

  • press and hold the Volume Down button for a couple seconds then keep holding and press the power button

It then asks if you would like to install the official TWRP app. Swipe for yes to install. The phone will reboot.

YOU ARE STILL NOT ROOT!

error: In recovery mode NO COMMAND and broken robot

SKIP IF YOU DID NOT GET THIS ERROR

You tried to go into recovery model from bootloader / fast boot menu and the file necessary for recovery was absent so you get this image and error instead of the expected Team Win Recovery Project blue recovery menu. Don't factory reset! We just need to get the TWRP file in the right place and try this again.

  1. make sure you downloaded both the img and the zip. Copy the zip to your device. These are two files you need to download from twrp.me. ( https://twrp.me/google/googlepixel.html ) - get the latest
  2. make sure you copied the zip file to your Pixel phone
  3. make sure you have the img file on the PC in the same directory as platform-tools (adb)
  4. make sure you rename the img file to twrp.img (the one in the platform-tools directory) ( mv twrp-3.3.0-0-sailfish.img twrp.img )
  5. make sure you boot into recovery and from the PC in the platform-tools working directory type: fastboot boot ./twrp.img
  6. Go to install and browse to the zip and install the zip. (it says swipe to flash)

Install Magisk Manager app

After phone is rebooted to desktop connect data cable and choose file transfer.

Make sure you copy MagiskManagerxxx.apk file to the ../Internal shared storage/Download folder of the phone

Go to the phone file manager via the app menu and use the file manager to navigate to the Download folder

Tap on the MagiskManagerxxx.apk file to install it

Run Magisk Manager app

The Magisk Manager is not the the Magisk App. I found out that I had to install magisk mangager from what I downloaded earlier, then install it from recovery. After reboot to the desktop I could open magisk manager but it indicated that magisk was not installed. ??? So they must be 2 different parts. The install option only allowed me to download a zip file. So I downloaded that to the download directory and reboot back to recovery. From recovery I choose to install the zip file. Then I reboot the phone. The phone takes a long time to boot then does not go to the android desktop, instead, back to the TWRP recovery menu.

  • choose advanced -> fix recovery bootloop

Now back to the android desktop so we are out of the bootloop. Press the Square and choose Magisk Manager. It still indicates Magisk is not installed.

Note: This device is using the A/B partition. There was no warns about installing TWRP when the phone has A/B partition in any of the guides I started with, but apparently it is not a good idea to install TWRP when the phone is the version with A/B partition. Too late now! moving on...

Attempting to install Magisk from zip using Recovery TWRP again. Difference in procedure. This time I downloaded the latest zip on the PC and transferred it to the phone via data cable rather than downloading from the Magisk Manager app. Result - phone slow too boot then stuck in bootloop again. Had to advanced, fix recovery bootloop again in TWRP.

This time I am making a backup in TWRP, The default backup options in TWRP are system, data, and boot. For most cases, this is sufficient for backing up a ROM. I am doing this as a precaution before proceeding.

Now downloading the latest Magisk Uninstaller from here: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445

Now reboot the phone to android desktop, and enable file sharing to copy the uninstaller to the phone, then reboot to recovery mode and install the uninstaller to clean things up before we try again.

additional attempts fail. Conclusion: not possible to install Magisk this way. Next we will try to use the method that patches the factory image.

Lets grab a factory image. My phone uses image

Just go to ABOUT PHONE and look at the build number, match it up with an image file from here:

Having a factory image copied onto your phone is a good idea anyway, it gives you a way to recover if something goes very wrong.

Pixel PQ3A.190605.003 

"sailfish" for Pixel
9.0.0 (PQ3A.190605.003, Jun 2019) 	Link 	3128c984ab63e16219113c4df7b03bdec6afacd8a6b5c0e46daac67c0237671f
  • filename: sailfish-pq3a.190605.003-factory-3128c984.zip

Keywords: Android

Retrieved from "http://wiki.robotz.com/index.php?title=Google_Pixel&oldid=17931"