TYT TH-9000D 1.25M Transceiver

From Free Knowledge Base- The DUCK Project: information for everyone
Revision as of 14:26, 14 April 2017 by Ke0etz (Talk | contribs)

Jump to: navigation, search

65 Watt Heavy Duty Two Way VHF Mobile Transceiver with ctcss/dcs (PL & DPL).

200 Alphanumeric Channels, Full Keypad Microphone. Cool-Blue Display Backlight. Includes mounting bracket & fused power Cable. Features 3 Selectable Power levels, DTMF, Keypad lock, Scan modes & more

front panel controls: 

     short press                                 long press
------------------------------                   ------------------------------
[F ]
[P1]                                             clone
[P2] open squelch "monitor"                      display operating voltage toggle
[x ] power
[P3] VFO/memory                                  scan
[P4] tune step                                   offset -,+,none, and freq
[P5] tone squelch (disable, tone, tsql, dcs)     chan memory ?

hand mic:

  • adjust transmit power: press [FUNC] then [0] to toggle though three transmit power levels.

Usage

This is a difficult radio.

Frequency Offset:

  1. LONG PRESS [P4] one time - you will see the offset frequency amount. Set it to 1.600 for the standard.
  2. LONG PRESS [P4] again - the second time you long press you toggle between -,+, and none
  3. SHORT PRESS [P4] while in the offset freq or toggle to save

PL/CTCSS Tone:

  1. SHORT PRESS [P5] one time - set the tone frequency
  2. SHORT PRESS [P5] again - toggle tone, tone sq, dcs, and off. You will see a T on the screen of tone is enabled.
  3. SHORT PRESS [P4] to save. Notice P4 and not P5. There may be other keys that also save.

Channel / VFO Toggle:

  • note: There must be at least one channel with saved data to be able to enter channel mode
  1. From the UNIT you can press [F] ..........

Save to Memory Channel:

  1. Select the channel, freq, and offset
  2. SHORT PRESS [F] and turn the vfo knob to desired channel number
  3. SHORT PRESS [P3] to save to channel memory

Toggle TX Power L/M/H:

  1. From the UNIT you can press [F] and then [P1] but not at the same time - toggles TX power
  2. From the MIC you can press [FUNC] and then [0] - toggles TX power

Help

Stuck in professional (channel only) mode:

  • Also referred to as Part 90 mode. Long press [F] until shows menu #26 and change it to NM or FR. Just don't be in CH. When item #26 is set to CH then the radio is locked in professional mode. To save press [P5].

Stuck in LOCK mode. LOCK symbol in top right:

  • Press [F] + [P5] to toggle between lock mode ON/OFF.
Retrieved from "http://wiki.robotz.com/index.php?title=TYT_TH-9000D_1.25M_Transceiver&oldid=14991"