Kenwood TM-241A

VFO Control

Select CTCSS Tone

1. Long-press the F key. The F indicator will flash.
2. Press the TONE/T.ALT button
3. Turn dial to select PL tone.
4. Once correct tone selected, short-press F key to accept.

Programming

1. Press the [VFO] key to select the VFO operating mode
2. Select the frequency, tone, offset
3. Press the [F] key. The [F] indicator and a channel memory number will be displayed.
4. Select the memory channel to store the frequency in.
5. Press the [MR/M] button within 10 seconds. If you hear a long beep, and the F indicator and channel indicator go away then the program was successful.