Yaesu FT-7800R

From Free Knowledge Base- The DUCK Project: information for everyone
Revision as of 20:58, 19 November 2017 by Ke0etz (Talk | contribs)

Jump to: navigation, search

CTCSS Operation

CTCSS setup involves two actions: setting the Tone Mode and then setting of the Tone Frequency. These actions are set up by using the [TONE(REV)] key and Set mode #44 (TN FRQ).

  1. Press the [ TONE ( REV )] key several times, so that "ENC" appears on the display
  2. press and hold in the [ BAND ( SET )] key for 1/2 second to enter the Set mode, then rotate the DIAL knob to select Menu #44 (TN FRQ). This Menu selection allows setting of the CTCSS tone frequency. Press the [ BAND ( SET )] key momentarily to enable adjustment of the CTCSS frequency. Rotate the DIAL knob.
Retrieved from "http://wiki.robotz.com/index.php?title=Yaesu_FT-7800R&oldid=16195"