OpenWRT on Asus WL-500gP: Command and Path Reference
From Free Knowledge Base- The DUCK Project: information for everyone
console commands
| COMMAND | DESCRIPTION |
| ipkg | package manager (update list status install) |
| logread | display entries from log files |
| nvram show | display nvram values |
| nvram set wl0_radio=0; wifi | turn radio off |
| nvram set wl0_radio=1; wifi | turn radio on |
| logread | view system log, all logs |
perform basic tasks by command path reference
restart network
/etc/init.d/S40network restart
search for files or folders
find / -name $1 -print
system logs
syslogd is started on startup. You can read it with 'logread'.
There are two options for where to send the logging output: (1) to a local file stored in RAM, (2) to a remote system. The local file option is very easy but because it is stored in RAM it will go away whenever the router reboots.
Enable remote logging:
nvram set log_ipaddr=<your syslogd ip> nvram commit
To run syslogd and klogd
vi /etc/inittab
add the following lines:
::respawn:/sbin/syslogd -n ::respawn:/sbin/klogd -n
Tells syslogd to write the log file to /var/log/messages
/var is linked to /tmp but we may need to create /var/log at boot time
vi /etc/init.d/rcS
add the following line:
mkdir /var/log
