TYT TH-9000D 1.25M Transceiver
From Free Knowledge Base- The DUCK Project: information for everyone
65 Watt Heavy Duty Two Way VHF Mobile Transceiver with ctcss/dcs (PL & DPL).
200 Alphanumeric Channels, Full Keypad Microphone. Cool-Blue Display Backlight. Includes mounting bracket & fused power Cable. Features 3 Selectable Power levels, DTMF, Keypad lock, Scan modes & more
front panel controls:
short press long press ------------------------------ ------------------------------ [F ] [P1] clone [P2] open squelch "monitor" display operating voltage toggle [x ] power [P3] VFO/memory scan [P4] tune step offset -,+,none, and freq [P5] tone squelch (disable, tone, tsql, dcs) chan memory ?
hand mic:
- adjust transmit power: press [FUNC] then [0] to toggle though three transmit power levels.
Usage
This is a difficult radio.
Frequency Offset:
- LONG PRESS [P4] one time - you will see the offset frequency amount. Set it to 1.600 for the standard.
- LONG PRESS [P4] again - the second time you long press you toggle between -,+, and none
- SHORT PRESS [P4] while in the offset freq or toggle to save
PL/CTCSS Tone:
- SHORT PRESS [P5] one time - set the tone frequency
- SHORT PRESS [P5] again - toggle tone, tone sq, dcs, and off. You will see a T on the screen of tone is enabled.
- SHORT PRESS [P4] to save. Notice P4 and not P5. There may be other keys that also save.
Channel / VFO Toggle:
Save to Memory Channel:
Help
Stuck in professional (channel only) mode:
- Also referred to as Part 90 mode. Long press [F] until shows menu #26 and change it to NM or FR. Just don't be in CH. When item #26 is set to CH then the radio is locked in professional mode. To save press [P5].
Stuck in LOCK mode. LOCK symbol in top right:
- Press [F] + [P5] to toggle between lock mode ON/OFF.
