Kenwood TM-241A

• Frequency Range TX: 144 - 148 MHz
• RX: 118 - 174 MHz
• RF Output Power HI 50 W
• RF Output Power LO 5 W
• RF Output Power MID 10 W
• Power Requirement 13.8V DC (±15%)
• Current Drain Receive Less than 600 mA
• Current Drain Transmit Less than 11 Amps
• Microphone Impedance 500-600 ohms
• Antenna Impedance 50 ohms
• Dimensions (W x H x D) 5.51 x 6.3 x 1.57 in. (140 x 40 x 160 mm)
• Weight (approx.) 2.4 lbs. (1.1 kg)

VFO Control

Select CTCSS Tone

1. Long-press the F key. The F indicator will flash.
2. Press the TONE/T.ALT button
3. Turn dial to select PL tone.
4. Once correct tone selected, short-press F key to accept.

Programming

1. Press the [VFO] key to select the VFO operating mode
2. Select the frequency, tone, offset
3. Press the [F] key. The [F] indicator and a channel memory number will be displayed.
4. Select the memory channel to store the frequency in.
5. Press the [MR/M] button within 10 seconds. If you hear a long beep, and the F indicator and channel indicator go away then the program was successful.