Talk:CCTV Software Package

I have a PICO2000 card but the program does not see the card. What do I need to do?

Answer:

We have tested the program with a freeware driver that works with all capture cards based on CONEXANT 878a chip. Please follow the following steps to properly install and configure your capture card: *

First of all, please download the following software:

The free, universal btwincap driver, Btinstaller.exe. (By Eduardo José Tagle btwincap.sourceforge.net)

Also you can download a zip file which contains files required to install driver by hand if installer did not work.

A BtSpy application - the custom card profile generator.

FALL BACK TO A CLEAN SYSTEM STATE

First, let's get your system back to the state it was in before you started messing with things. Whether you are currently using the PICO Star Imavision driver, the btwincap driver, or some other Bt8x8 driver, you need to make every last remnant of these drivers go away. Let's try the following:

Begin by uninstalling any/all third party surveillance software

Uninstall the current driver from your control panel hardware tree (you've probably got an audio driver and a video driver. Uninstall both of them).

Run the btwincap installation utility, Btinstaller.exe

When prompted, select the UN-install option, the installation utility will search your system for any Bt8x8 drivers and delete them.

Reboot

INSTALL THE BTWINCAP DRIVER

Now it's time to properly install and configure the btwincap driver so that it will work with your capture card.

Run the btwincap installation utility, Btinstaller.exe

Select the install option this time around.

Select Custom Card when asked for a card type.

Load the BtSpy report.

Finish the installation.

Reboot and verify that the following two items show as correctly installed in your control panel hardware tree (i.e. no exclamation points next to either):

Conexant Video Capture

Conexant Audio Capture

To verify that your drivers actually work, run amcap.exe. Verify that you can see all four camera inputs, one at a time, using this utility. Note that you cannot view more than one camera at a time with the application.

NEXT STEPS TO GET ACTIVE WEBCAM WORKING

Add a new camera.

Select Capture Method - "Direct Show".

Choose "Conexant's BT PCI Capture" as Video Device.

To capture video from another video source on the same card:

Add a new camera.

Select Capture Method - "Direct Show".

Choose "Conexant's BT PCI Capture" as Video Device.

You should now see a second drop down box "Video Source" that shows different camera inputs to choose from.

• By courtesy of Andy ejtagle@tutopia.com

Other software unconfirmed existance...

• avermedia software

dvr cards on the market

kodicom, geovision, avermedia, pico and magic radar

Geo -vs- Iview

There are aproximately 10-15 manufacturers of DVR CARDS. These manufacturers sell their cards to "Software" developers. These software developers create a DVR software to record, view, log, ETC video transmision.

There are over 500 (I verified it) companies that sell their own version of a DVR card. It can be in the range of "pico 2000" .99cent software, to Witness, or Geo, or kodicom, ect.

Very very few of these companies have CCTV background before coming to market with their dvr products. Most of them basicaly, like a smart business man, saw a new hot market for a particular type of product, and, to beat the competition, rushed to sell their products without doing the proper quality control checks. Many of these companies lack the personel that is true Knowledgueble to provide proper support after the sale.

Ok, so this post don't take over the entire forum, let's just narrow it down to GEO, since that's who you are askin about.

Geo is very famous because of their marketing stratergy. What does this mean? Basically, my little brother, with enough cash to buy 25 card direct, can contact geo, and say that he's a dealer, create a fake website on let's say geocities.com, and say that he's a dealer, and guess what? geo will sell him the cards, and call it a day. Many TRUE distributors and dealers on this forum, DVR-Australia for example, can tell you that this is true, and how frustraiting it can be, expecially since geo basically went around the world, telling everyone who would sell their products, that they are going to give them "exclusivity" for their region, or sometimes their country, only to find out that 2 months down the road, your competitor has been told the same thing, and he's 2 blocks away.

Now, the software. I'm not going to be a hipocrate and sit here and say that their software is crap, because it's not, but it looks like a high school kid with too much time on his hands created it. It's not professional at all, everytime that you want to use a different funtion, like the webserver, or the log viewer, you have to open a different program everytime, instead of just creating a "central shell", where all funcions are streamlined into one program. If you click on the log viewer, just look at the windows taskbar, and there will be 2 programs open. You are going to spend all this money on their products, and it does not even have a decent GUI? come on!!!

Support. I'm just going to say this as simple as I can. Can anyone here tell me that you can call geo direct, weather is in their US or Taiwan offices, and talk to the egenieers who created and maintain and upodate the actual software that runs their cards? I-View, you can.

One more thing, did you know that the cards that geo uses are not manufactured by them? they buy OEM like almost everyone else, while I-view, manufactures their own. Don't you think that there is a little advantage of manufacturing your own cards and designing the software with both set of engenieers right next to eachother?