Stonco Nytewatch Security Light

From Free Knowledge Base- The DUCK Project: information for everyone
Revision as of 17:34, 3 July 2014 by Admin (Talk | contribs)

Jump to: navigation, search

Stonco NyteWatch by Philips is an Architectural Low-Glare Motion Sensor security light.

Stonconytewatch01.jpg
The NyteWatch is the next generation of motion sensing security lighting that combines precise motion sensitivity with reduced glare operation. 240° horizontal detection and 70° vertical detection. The light has wall mounting or soffit mounting options. It can be mounted to to recessed and surface junction boxes, single gang FS boxes, or directly to a surface without the use of a junction box. The fixture is approved for internal wiring.
• Colors: black or white
• 240° horizontal vision plane
• Lamping: (2) 150w quartz halogen (included)
• 70° vertical vision plane
• Built-in electronic circuit under-drives lamps, tripling lamp life
• Built-in photo control with ON/OFF switch
• 10-second through 15-minute time delay control
• Mounting: For wall or soffit mounting to recessed and surface junction boxes, round boxes and single gang FX boxes (includes mounting hardware)
• Surge protector
• Aiming: NBA Models adjust from 0˚-30˚; NBC Models are fixed at 0˚
• Automatic sensitivity adjustment
• Durable die-cast aluminum housing
• Nyte-Glow™ setting dims light to low output for dusk-to-dawn operation

Set Up

Stonconytewatch01.png

Setting Detection Zone

Stonconytewatch02.png

Adjusting Detection Zone

Stonconytewatch03.png

Re-Lamping

Stonconytewatch04.png

Miscellaneous

Stonconytewatch05.png

 

Stonco web site: www.stonco.com