Difference between revisions of "Icom IC-756 Family"

From Free Knowledge Base- The DUCK Project: information for everyone
Jump to: navigation, search
m (Icom IC-756 Pro III)
 
Line 26: Line 26:
 
Covers the nine HF bands and 60-meter plus 6 meters. Manually program 60-meter channels.  4.9 inch TFT color dot matrix LCD. Real-time spectrum scope with mini-scope. 32-bit floating point DSP Digital IF filter with 51 selectable bandwidths. Soft and sharp filter shapes can be selected in both SSB and CW modes independently, Programmable SSB transmit bandwidth, microphone equalizer, manual notch function, digital twin pass band tuning (PBT), all mode, including PSK31. 121 position microphone equalizer.  LCD screensaver.  The IC-756 Pro II provided three selectable TOBW settings: WIDE/MID/NAR. The lower and upper -6dB points of the transmitted audio-frequency response are fixed for each setting. In the IC-756Pro III, it is possible to program each of the three settings individually with the following preset cutoff frequencies: Lower -6dB point: 100, 300 and 500 Hz., Upper -6dB point: 2.5, 2.7 and 2.9 kHz.
 
Covers the nine HF bands and 60-meter plus 6 meters. Manually program 60-meter channels.  4.9 inch TFT color dot matrix LCD. Real-time spectrum scope with mini-scope. 32-bit floating point DSP Digital IF filter with 51 selectable bandwidths. Soft and sharp filter shapes can be selected in both SSB and CW modes independently, Programmable SSB transmit bandwidth, microphone equalizer, manual notch function, digital twin pass band tuning (PBT), all mode, including PSK31. 121 position microphone equalizer.  LCD screensaver.  The IC-756 Pro II provided three selectable TOBW settings: WIDE/MID/NAR. The lower and upper -6dB points of the transmitted audio-frequency response are fixed for each setting. In the IC-756Pro III, it is possible to program each of the three settings individually with the following preset cutoff frequencies: Lower -6dB point: 100, 300 and 500 Hz., Upper -6dB point: 2.5, 2.7 and 2.9 kHz.
  
Superseded by the IC-7600.
+
Superseded by the [[Icom IC-7600]].
  
 
[[Category:Electronics]]
 
[[Category:Electronics]]

Latest revision as of 20:35, 17 October 2017

Ham / Amateur Radio Transceiver that operates in the HF and the lower portion of the VHF band. 100 Watt Output.


Icom IC-756

Covers the nine HF bands plus 6 meters. 4.9 inch monochromatic TFT dot matrix LCD display. B&W spectrum scope.

Optional filters for this model only. All successors required no additional filters.

Icom IC-756.jpg

Superseded by the IC-756Pro

Icom IC-756 Pro

Covers the nine HF bands plus 6 meters. 4.9 inch TFT color dot matrix LCD. Spectrum scope. 32-bit floating point DSP Digital IF filter with 41 selectable bandwidths, microphone equalizer, manual notch function, digital twin pass band tuning (PBT), all mode, including PSK31.

Superseded by the IC-756ProII

Icom IC-756 Pro II

Covers the nine HF bands plus 6 meters. 4.9 inch TFT color dot matrix LCD. Real-time spectrum scope. 32-bit floating point DSP Digital IF filter with 51 selectable bandwidths. Soft and sharp filter shapes can be selected in both SSB and CW modes independently, microphone equalizer, manual notch function, digital twin pass band tuning (PBT), all mode, including PSK31. 121 position microphone equalizer.

Superseded by the IC-756ProIII

Icom IC-756 Pro III

Covers the nine HF bands and 60-meter plus 6 meters. Manually program 60-meter channels. 4.9 inch TFT color dot matrix LCD. Real-time spectrum scope with mini-scope. 32-bit floating point DSP Digital IF filter with 51 selectable bandwidths. Soft and sharp filter shapes can be selected in both SSB and CW modes independently, Programmable SSB transmit bandwidth, microphone equalizer, manual notch function, digital twin pass band tuning (PBT), all mode, including PSK31. 121 position microphone equalizer. LCD screensaver. The IC-756 Pro II provided three selectable TOBW settings: WIDE/MID/NAR. The lower and upper -6dB points of the transmitted audio-frequency response are fixed for each setting. In the IC-756Pro III, it is possible to program each of the three settings individually with the following preset cutoff frequencies: Lower -6dB point: 100, 300 and 500 Hz., Upper -6dB point: 2.5, 2.7 and 2.9 kHz.

Superseded by the Icom IC-7600.