Difference between revisions of "Icom IC-7600"

From Free Knowledge Base- The DUCK Project: information for everyone
Jump to: navigation, search
Line 21: Line 21:
 
*AM Maximum Power: 30 W
 
*AM Maximum Power: 30 W
 
*AM Minimum Power: 1 W  
 
*AM Minimum Power: 1 W  
 +
 +
==Ver.2.00 Firmware==
 +
[[File:icomic7600firmwareup01.jpg]]
 +
 +
Tip: The first time you update, thoroughly read the Section 14 (UPDATING THE FIRMWARE) of the IC-7600’s instruction manual and information for firmware 2.00 on Icom Co. Support page.  The firmware can be updated using a USB-flash drive.
 +
 +
Some new features:
 +
*point and click the mouse for Click-and-Listen receiver control.
 +
 +
[[File:icomic7600firmwareup02.jpg]]
 +
  
  

Revision as of 21:56, 17 October 2017

The Icom IC-7600 covers the 160 to 6 meter amateur bands. It utilizes IF-DSP technology and selectable roofing filters at 3kHz, 6kHz and 15kHz. Like the IC-7700 and IC-7800, the IC-7600 uses dual 32-bit floating-point Texas Instruments DSP chips with one for the radio and the other for the spectrum scope. This display is a 5.8 inch color WQVGA LCD.

Status: Currently on the market as of 2017, still in production. Replaces the Icom IC-756 Family of transceivers.

  • Receive Range 1: 0.030-60.000 MHz
  • Receive System: Single receiver
  • Dual Watch: Yes
  • Roofing Filter Capability: Yes
  • Roofing Filter Bandwidth: 15/6/3kHz
  • Third Order Intercept (IP3): Over 30 dBm
  • Transceiver Input Voltage: 13.8 Vdc
  • Transceiver Maximum Current: 23.0 A
  • Antenna Ports: 2
  • Computer Connection Type: USB or CI-V interface
  • Digital Mode Audio Input/Output: USB or 8-pin DIN
  • Voice Synthesizer Capability: Yes
  • Radio Dimensions: Width 13.375", Height 4.563", Depth: 11.000"
  • Weight: 22.000 lbs.
  • SSB/CW Maximum Power: 100 W
  • SSB/CW Minimum Power: 2 W
  • AM Maximum Power: 30 W
  • AM Minimum Power: 1 W

Ver.2.00 Firmware

Icomic7600firmwareup01.jpg

Tip: The first time you update, thoroughly read the Section 14 (UPDATING THE FIRMWARE) of the IC-7600’s instruction manual and information for firmware 2.00 on Icom Co. Support page. The firmware can be updated using a USB-flash drive.

Some new features:

  • point and click the mouse for Click-and-Listen receiver control.

Icomic7600firmwareup02.jpg