Difference between revisions of "Icom IC-7600"
m (→Ver.2.00 Firmware) |
|||
| Line 39: | Line 39: | ||
[[File:icomic7600firmwareup02.jpg]] | [[File:icomic7600firmwareup02.jpg]] | ||
| + | ==MARS / Extended Transmit and Receive== | ||
| + | MARS/CAP Mod: IC-7600 | ||
| + | |||
| + | RX Frequency Coverage Expansion | ||
| + | *remove D52, D53, D54, and D55 | ||
| + | |||
| + | TX Frequency Coverage Expansion | ||
| + | *remove D56, D57, D58, and D59 | ||
| + | |||
| + | offers: 1.6 - 30MHz and 51 - 54 MHz | ||
| + | |||
| + | 5MHz Band Operation | ||
| + | *remove D62 | ||
| + | |||
| + | offers: 5.255 - 5.405 MHz | ||
| + | |||
| + | [[File:icomic7600marscap01.png]] | ||
Revision as of 22:10, 17 October 2017
The Icom IC-7600 covers the 160 to 6 meter amateur bands. It utilizes IF-DSP technology and selectable roofing filters at 3kHz, 6kHz and 15kHz. Like the IC-7700 and IC-7800, the IC-7600 uses dual 32-bit floating-point Texas Instruments DSP chips with one for the radio and the other for the spectrum scope. This display is a 5.8 inch color WQVGA LCD.
Status: Currently on the market as of 2017, still in production. Replaces the Icom IC-756 Family of transceivers.
- Receive Range 1: 0.030-60.000 MHz
- Receive System: Single receiver
- Dual Watch: Yes
- Roofing Filter Capability: Yes
- Roofing Filter Bandwidth: 15/6/3kHz
- Third Order Intercept (IP3): Over 30 dBm
- Transceiver Input Voltage: 13.8 Vdc
- Transceiver Maximum Current: 23.0 A
- Antenna Ports: 2
- Computer Connection Type: USB or CI-V interface
- Digital Mode Audio Input/Output: USB or 8-pin DIN
- Voice Synthesizer Capability: Yes
- Radio Dimensions: Width 13.375", Height 4.563", Depth: 11.000"
- Weight: 22.000 lbs.
- SSB/CW Maximum Power: 100 W
- SSB/CW Minimum Power: 2 W
- AM Maximum Power: 30 W
- AM Minimum Power: 1 W
Ver.2.00 Firmware
Tip: The first time you update, thoroughly read the Section 14 (UPDATING THE FIRMWARE) of the IC-7600’s instruction manual and information for firmware 2.00 on Icom Co. Support page. The firmware can be updated using a USB-flash drive.
Some new features:
- point and click the mouse for Click-and-Listen receiver control.
- Waterfall screens
- additional functions added to the spectrum scope
- APF AF Level setting
- CI-V commands for antenna control, logging software and RIT/DELTA-TX
- TX Delay (HF/50M) settings for variable delay time
- Standby setting to remotely turn ON the IC-7600 using the REMOTE jack.
- MOS-FET is now the default value of SEND Relay Type
MARS / Extended Transmit and Receive
MARS/CAP Mod: IC-7600
RX Frequency Coverage Expansion
- remove D52, D53, D54, and D55
TX Frequency Coverage Expansion
- remove D56, D57, D58, and D59
offers: 1.6 - 30MHz and 51 - 54 MHz
5MHz Band Operation
- remove D62
offers: 5.255 - 5.405 MHz
