MythTV Setup- IP Remote Control

From Free Knowledge Base- The DUCK Project: information for everyone
Revision as of 14:33, 23 January 2015 by Admin (Talk | contribs)

Jump to: navigation, search

Frontend control socket

MythTV can be controlled remotely from any IP based device, including an Android smartphone. Using a software (app) on the Android smartphone such as Mythmote turns your smartphone into a remote control for MythTV.

Your front-end system should be assigned a static IP address. Although this is not a requirement, it will prevent future connectivity issues as a result of the IP being reassigned.

Frontend Setup

From within the MythTV front-end navigate the following: Utilities / Setup -> Setup -> General

Mythmote01.jpg Mythmote02.jpg Mythmote03.jpg

The General Setup is a wizard with several screens to click though. Just keep clicking the next button in the bottom right until you come to the "Remote Control" screen, which should be screen eight.

Mythmote04.jpg

Check the box labeled "Enable Network Remote Control Interface." Leave the default port set to "6546". Now click the next button in the bottom right and on the final screen click the finish button in the bottom right.

Retrieved from "http://wiki.robotz.com/index.php?title=MythTV_Setup-_IP_Remote_Control&oldid=9989"