Difference between revisions of "HowTo Disable IPv6 in Windows Vista and 7"

From Free Knowledge Base- The DUCK Project: information for everyone
Jump to: navigation, search
 
Line 8: Line 8:
  
 
Disable it in both places.  That is 1) the Local Area Connection Properties and 2) the Windows Registry.  This will completely disable it.
 
Disable it in both places.  That is 1) the Local Area Connection Properties and 2) the Windows Registry.  This will completely disable it.
 +
 +
==== Windows Local Area Connection Properties GUI Interface ====
 +
 +
Press the '''Windows Key + R''' and in the text field type: ncpa.cpl
 +
 +
Right click on the correct network interface icon and click "Properties."
  
 
[[File:htdIPv6001.jpg]]
 
[[File:htdIPv6001.jpg]]
 +
 +
Uncheck "Internet Protocol Version 6″ and click on "OK"
 +
 +
==== Windows Registry Editor Modification Procedure ====
  
 
# Open regedit.exe
 
# Open regedit.exe
Line 24: Line 34:
 
and then reboot.
 
and then reboot.
  
−
MS Utilities:
+
If you want to see how the key entry would appear in a reg file:
−
http://support.microsoft.com/kb/929852
+
  
−
Disabling IPv6 might be a good idea, because the protocol consumes additional CPU time and system memory as well as bandwidth. Of course the resource usage of an internet protocol is pretty low, but why would you waste resources for 2 internet protocols, 1 is already enough.
+
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\TCPIP6\Parameters]
 +
“DisabledComponents”=dword:ffffffff
  
−
Enabling another internet protocol might also increase your vulnerability to possible exploits. If there is going to be an IPv6 exploit and you are only using IPv4, you won’t be affected.  
+
If you are familiar with creating text reg files you can use this method as an alternative to manually opening regedit.exe and creating a key.
  
−
Disable IPv6 for tunnel adapter & interfaces
+
=== Option 2: Disable IPv6 via Downloadable Utility ===
  
−
If you are not familiar with editing the registry, I created a .reg file for you that you can use to add the registry key and disable IPv6. To verify that this file is ok, open it with a notepad once, it only includes the following lines:
+
Microsoft provides a file called: MicrosoftFixit50409.msi
  
−
    Windows Registry Editor Version 5.00
+
Running that program will disable IPv6. It is available from Microsoft.com.  The folks at Microsoft move stuff around on their web site more than Walmart moves store items.  Last we knew the link was here:
 +
* [http://support.microsoft.com/kb/929852 Automatically disable or re-enable IPv6 or its components] Knowledge Base ID: 929852
  
−
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\TCPIP6\Parameters]
+
Windows Versions: Vista (and some later versions).  DOES NOT APPLY TO XP.
−
    “DisabledComponents”=dword:ffffffff
+
  
−
http://windows7themes.net/en-us/disable-ipv6-windows-7/
+
They offer utilities to do all of the following:
 +
* Disable IPv6
 +
* Prefer IPv4 over IPv6 in prefix policies
 +
* Disable IPv6 on all nontunnel interfaces
 +
* Disable IPv6 on all tunnel interfaces
 +
* Disable IPv6 on nontunnel interfaces (except the loopback) and on IPv6 tunnel interface
  
−
=== Option 2: Disable IPv6 via Downloadable Utility ===
+
* Re-enable IPv6
 +
* Prefer IPv6 over IPv4 in prefix policies
 +
* Re-enable IPv6 on all nontunnel interfaces
 +
* Re-enable IPv6 on all tunnel interfaces
 +
* Re-enable IPv6 on nontunnel interfaces and on IPv6 tunnel interfaces
  
 
=== Some Related Pages ===
 
=== Some Related Pages ===

Latest revision as of 14:47, 4 March 2015

Microsoft includes native support for IPv6 and is enabled by default since in Windows Vista. IPv6 is the new computer address protocol that will eventually replace IPv4, although, like the metric system the United States seems never to actually adopt. Unless you network has a specific requirement for IPv6 you can and perhaps should disable it.

You cannot disable IPv6 by disabling the protocol on each of your network interfaces. The proper way to disable IPv6 is to disable it by modification of the windows registry. Another option is to use a set of utilities by Microsoft to enable, disable and modify the behavior of IPv6 networking in windows. A utility that will automatically disable or re-enable IPv6 or its components is available from Microsoft.com.

The argument in support of disabling IPv6 in Microsoft Windows Vista and Windows 7 considers the factors of resource usage and network security. There are also minor glitches dealing with ICMP broadcast and IPv6 on an IPv4 network in Windows. Since in all likelihood you are not using it then lets go ahead and disable it.

Option 1: Manual IPv6 Disable Method

Disable it in both places. That is 1) the Local Area Connection Properties and 2) the Windows Registry. This will completely disable it.

Windows Local Area Connection Properties GUI Interface

Press the Windows Key + R and in the text field type: ncpa.cpl

Right click on the correct network interface icon and click "Properties."

HtdIPv6001.jpg

Uncheck "Internet Protocol Version 6″ and click on "OK"

Windows Registry Editor Modification Procedure

  1. Open regedit.exe
  2. goto HKEY_LOCAL_MACHINE, SYSTEM, CurrentControlSet, services, TCPIP6 and Parameters.
  3. Right click on Parameters and select New and then DWORD (32-bit) Value.
  4. Name the new value "DisabledComponents" and hit Enter.
  5. Right click on the new DisabledComponents value you just created and select Modify.
  6. Set the value of DisabledComponents to "FFFFFFFF" and click OK. That is a series of 8 F characters.

For Windows 7 however doing it on NIC properties should be enough.

Run this from command prompt 

reg add hklm\system\currentcontrolset\services\tcpip6\parameters /v DisabledComponents /t REG_DWORD /d 255

and then reboot.

If you want to see how the key entry would appear in a reg file: 

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\TCPIP6\Parameters]
“DisabledComponents”=dword:ffffffff

If you are familiar with creating text reg files you can use this method as an alternative to manually opening regedit.exe and creating a key.

Option 2: Disable IPv6 via Downloadable Utility

Microsoft provides a file called: MicrosoftFixit50409.msi

Running that program will disable IPv6. It is available from Microsoft.com. The folks at Microsoft move stuff around on their web site more than Walmart moves store items. Last we knew the link was here:

Windows Versions: Vista (and some later versions). DOES NOT APPLY TO XP.

They offer utilities to do all of the following:

  • Disable IPv6
  • Prefer IPv4 over IPv6 in prefix policies
  • Disable IPv6 on all nontunnel interfaces
  • Disable IPv6 on all tunnel interfaces
  • Disable IPv6 on nontunnel interfaces (except the loopback) and on IPv6 tunnel interface
  • Re-enable IPv6
  • Prefer IPv6 over IPv4 in prefix policies
  • Re-enable IPv6 on all nontunnel interfaces
  • Re-enable IPv6 on all tunnel interfaces
  • Re-enable IPv6 on nontunnel interfaces and on IPv6 tunnel interfaces

Some Related Pages

Retrieved from "https://wiki.robotz.com/index.php?title=HowTo_Disable_IPv6_in_Windows_Vista_and_7&oldid=10406"