Difference between revisions of "Discone Antenna"
(Created page with "A discone antenna is omnidirectional, vertically polarized and with gain similar to a dipole, it is exceptionally wideband, offering a frequency range ratio of up to approxima...") |
|||
| Line 6: | Line 6: | ||
The discone can also be used to transmit depending on the design. Consider an omnidirectional capable of transmitting on ham radio bands 50, 144, 220, 432, 900, and 1200 MHz on the same antenna, which is all possible with the right discone. | The discone can also be used to transmit depending on the design. Consider an omnidirectional capable of transmitting on ham radio bands 50, 144, 220, 432, 900, and 1200 MHz on the same antenna, which is all possible with the right discone. | ||
| + | |||
| + | [[Category:Electronics]] | ||
| + | [[Category:Consumer Electronics]] | ||
| + | [[Category:Radio]] | ||
| + | [[Category:2-Way Radio]] | ||
Revision as of 20:37, 10 February 2016
A discone antenna is omnidirectional, vertically polarized and with gain similar to a dipole, it is exceptionally wideband, offering a frequency range ratio of up to approximately 10:1. The radiation pattern in the horizontal plane is quite narrow, making its sensitivity highest in the direction of the horizon and rather less for signals coming from relatively close by.
Discone signal gain is achieved by compressing the radiation pattern into a donut shape with little of the signal radiating upwards or downwards, concentrating the pattern perpendicular to the vertical axis of the antenna.
The discone is often the choice for use with a police scanner. Although a discone is the best for all around scanning antenna, it is not as optimal for lower frequencies such as those used by CB and HF ham radio.
The discone can also be used to transmit depending on the design. Consider an omnidirectional capable of transmitting on ham radio bands 50, 144, 220, 432, 900, and 1200 MHz on the same antenna, which is all possible with the right discone.
