The following lines were added (+) and removed (-):
==Hardware=====Accessory===The accessory jack on the Baofeng UV-5R is a Kenwood compatible two(2)-pin design. Many imported radios use Kenwood compatible 2-pin connector including Baofeng and Wouxun. In the hand speaker microphone accessory inductors are for filtering. It uses an electret condesor mic capsule with a small FET preamplifier. The speaker microphone connector uses two [[TRS Phono Plug]] connectors. The speaker audio output is a 2.5mm TRS while the microphone (the larger) input connector is the 3.5mm TRS, both femail into the HT. On the connector the tip of the 3.5mm plug and the ring of the 2.5mm plug are for the USB programming connection. The specification in the radio manual indicates an audio output of 1W into 16 Ohms.[[Image:kenwoodbaofengcombdiag.png]]note: see the TALK page for more diagramsreference:* [http://m0wye.blogspot.com/2016/06/microphone-and-speaker-connections-for.html Microphone and Speaker Connections for TYT MD380] on MOWYE's Blog* Wired the same as the [[Baofeng BF-F8HP]] <small><small>keywords: MD380 MD-380 Tytera Tyterra Tyt380 TYT-380 DMR MotoTRBO Moto TRBO Motorola digital talkgroup</small></small>