Difference between revisions of "Talk:Software RAID on Linux"
(→Set up RAID 1 with fdisk - 2/18/2017: new section) |
(→Set up RAID 1 with fdisk - 2/18/2017) |
||
| Line 11: | Line 11: | ||
== Set up RAID 1 with fdisk - 2/18/2017 == | == Set up RAID 1 with fdisk - 2/18/2017 == | ||
| + | |||
| + | Each drive is the same size. Each drive needs to have identical partitions created. Using fdisk create a small partition of less than 1GB and use the remaining space for the second partition. Due this for each drive. The starting block will likely be at 2048, which is fine. Ensure that you use the same starting block and ending block on both. | ||
| + | |||
| + | When specifying the ending block in fdisk new partition creation, you can specify the starting block as 2048 and then for the ending block specify a size in megabytes. Use the format beginning with the + sign. For 840MB enter "+840" when it asks for the ending block. | ||
If you have 2 drives, /dev/sda and /dev/sdb | If you have 2 drives, /dev/sda and /dev/sdb | ||
| Line 25: | Line 29: | ||
* d - delete any existing partitions | * d - delete any existing partitions | ||
* n - create a new partition | * n - create a new partition | ||
| + | |||
| + | Once again using fdisk go back into each drive and change the "type" of the partitions to | ||
Latest revision as of 23:23, 18 February 2017
Updated Notes: 2/18/2017 RAID 1 on Linux Mint
useful RAID reference:
- How To Create RAID Arrays with mdadm on Ubuntu 16.04
Setting up Raid 1 (mirror) in linux mint (or any distro)
Setting up RAID 1 (Mirroring) using ‘Two Disks’ in Linux – Part 3
Set up RAID 1 with fdisk - 2/18/2017
Each drive is the same size. Each drive needs to have identical partitions created. Using fdisk create a small partition of less than 1GB and use the remaining space for the second partition. Due this for each drive. The starting block will likely be at 2048, which is fine. Ensure that you use the same starting block and ending block on both.
When specifying the ending block in fdisk new partition creation, you can specify the starting block as 2048 and then for the ending block specify a size in megabytes. Use the format beginning with the + sign. For 840MB enter "+840" when it asks for the ending block.
If you have 2 drives, /dev/sda and /dev/sdb
fdisk /dev/sda
Create Partitions with fdisk
- d - delete any existing partitions
- n - create a new partition
fdisk /dev/sdb
Create Partitions with fdisk
- d - delete any existing partitions
- n - create a new partition
Once again using fdisk go back into each drive and change the "type" of the partitions to
Now use fdisk to convert partitions to a type needed for building the RAID array
fdisk /dev/sda
- t - change the partition type to "fd". You can get a list of available types
