Difference between revisions of "Dentron MT-2000A and MT-3000A"
From Free Knowledge Base- The DUCK Project: information for everyone
(Created page with "These are efficient antenna tuners capable of handling full legal limit power for use with amateur radio. == Inductor Guide == band frequency inductor cap and...") |
(→Inductor Guide) |
||
| Line 2: | Line 2: | ||
== Inductor Guide == | == Inductor Guide == | ||
| + | Inductor selection is a starting point for you to tune to resonance with your own antenna setup. | ||
| + | |||
| + | Dentron recommends setting both capacitor selectors (Transmitter Matching) and (Antenna matching) to setting 5 before trying to locate the correct inductor setting for the frequency. Watch for the highest noise/signal level on the S meter. When the best inductor is located then fine tune using the capacitance tuning dials. | ||
| + | |||
| + | The following guide is for an Inverted V 66 on each leg | ||
band frequency inductor cap and ind select | band frequency inductor cap and ind select | ||
----------------------------------------------------------- | ----------------------------------------------------------- | ||
| − | 160 | + | 160 1990 R 6.7, R, 5.0 |
| − | 80 3980 K 4.0, K, 3.0 | + | 80 3980 K 4.0, K, 3.0 1:1 |
60 | 60 | ||
40 | 40 | ||
Revision as of 09:50, 2 March 2017
These are efficient antenna tuners capable of handling full legal limit power for use with amateur radio.
Inductor Guide
Inductor selection is a starting point for you to tune to resonance with your own antenna setup.
Dentron recommends setting both capacitor selectors (Transmitter Matching) and (Antenna matching) to setting 5 before trying to locate the correct inductor setting for the frequency. Watch for the highest noise/signal level on the S meter. When the best inductor is located then fine tune using the capacitance tuning dials.
The following guide is for an Inverted V 66 on each leg
band frequency inductor cap and ind select ----------------------------------------------------------- 160 1990 R 6.7, R, 5.0 80 3980 K 4.0, K, 3.0 1:1 60 40 20 15 10 -----------------------------------------------------------
