Difference between revisions of "Iambic Keyer"
(→Right or Left Hand Key) |
|||
| (One intermediate revision by one user not shown) | |||
| Line 16: | Line 16: | ||
The example is the less common lefty configuration. Reverse wires (A) and (C) for the more common right hand operation. | The example is the less common lefty configuration. Reverse wires (A) and (C) for the more common right hand operation. | ||
| + | |||
| + | The paddles should be wired with the "Dit" being made by the operator's right thumb and the "Dah" being made by the right index finger. This is a recommended way of doing it, however, there are some people that prefer to use their thumb to produce a dah rather than a dit. There is no rule saying you have to do it a certain way. | ||
==Mode A and B== | ==Mode A and B== | ||
| Line 32: | Line 34: | ||
==Slap Keying== | ==Slap Keying== | ||
| + | The term "keyer" is generally used to refer to an "electronic keyer," which is a device that will generate dots or dashes depending on which of the two input switches is closed. Usually a device called a "paddle" or "bug" is used for input switching (sending). An iambic keyer is simply an electronic keyer that can be operated with a dual paddle. | ||
| + | |||
Single lever keying with a bug is sometimes called slap keying since you can only depress either the dit (slap to the right) or dah (slap to the left). If you use a dual lever keyer such as an Iambic keyer only slapping to the left or right, then you are slap keying. This is fine, however, it does not utilize the "iambic" functionality of the key. | Single lever keying with a bug is sometimes called slap keying since you can only depress either the dit (slap to the right) or dah (slap to the left). If you use a dual lever keyer such as an Iambic keyer only slapping to the left or right, then you are slap keying. This is fine, however, it does not utilize the "iambic" functionality of the key. | ||
| Line 37: | Line 41: | ||
The single paddle keyer is called a bug, which is mentioned above. Users of the bug tend to use a slapping action, also mentioned above. However, those learning to use an iambic paddle are encouraged not to slap the paddles. Just a light touch is all it takes if you have it adjusted correctly. If the paddle moves around the table while you are sending then you are using too much force. | The single paddle keyer is called a bug, which is mentioned above. Users of the bug tend to use a slapping action, also mentioned above. However, those learning to use an iambic paddle are encouraged not to slap the paddles. Just a light touch is all it takes if you have it adjusted correctly. If the paddle moves around the table while you are sending then you are using too much force. | ||
| + | |||
| + | ==Disambiguation== | ||
| + | An electronic keyer can support the iambic sending technique, in which case it is an "Iambic Keyer." The term Iambic has nothing to do with the paddle. Iambic sending does requires a dual-lever paddle. A bug only has one lever and therefore cannot do iambic sending. You can use an iambic keyer as though it was a bug, but a bug cannot do iambic keying. | ||
| + | |||
| + | There is a benefit to iambic keying only if the technique is adopted and the individual is skilled in the practice. Not all operators will master the iambic paddle and therefore any benefit may be impossible to perceive. It is true that fewer movements of the hand are required in order to generate any given piece of Morse code text. | ||
| + | |||
| + | Four different CW Key types exist: | ||
| + | #Straight Key | ||
| + | #Semi-Auto Bug | ||
| + | #Electronic Keyer | ||
| + | #Iambic Electronic Keyer | ||
| + | |||
| + | |||
| + | |||
| + | |||
[[Category:Electronics]] | [[Category:Electronics]] | ||
[[Category:Radio] | [[Category:Radio] | ||
Latest revision as of 22:31, 13 April 2017
Also known as Iambic Paddles, or Iambic Key.
An iambic keyer consists of two separately actuated switches. Iambic operation is useful for sending characters that have alternating patterns such as a period or the letter C. The "iambic" function is created with an electronic keyer by squeezing the paddles together. The squeezing produces alternating dits and dahs similar to a sequence of iambs in poetry, which is where it gets its name.
- dit (.) refers to short and dah (-) refers to long
Although a single paddle keyer also utilizes separate contacts for dits and dahs, there is no ability to make both contacts simultaneously by squeezing the paddles together. Iambic keying by squeezing the paddles together creates alternating dits and dahs. This is supposed to increase speed and create a convenience or ease in sending cw. For sending Morse at speeds greater than 20 to 30 wpm the straight key becomes impractical. The iambic key becomes one viable option for the speed keyer.
Right or Left Hand Key
Most right handed people use their right hand on the paddles. The THUMB is always used to send the dit and the INDEX FINGER for dah.
- Right Hand Keyer - left paddle (thumb) is the dit / pushes right
- Left Hand Keyer - right paddle (thumb) is the dit / pushes left
The example is the less common lefty configuration. Reverse wires (A) and (C) for the more common right hand operation.
The paddles should be wired with the "Dit" being made by the operator's right thumb and the "Dah" being made by the right index finger. This is a recommended way of doing it, however, there are some people that prefer to use their thumb to produce a dah rather than a dit. There is no rule saying you have to do it a certain way.
Mode A and B
Mode A and B refer to the way that a Morse code keyer handles iambic (squeeze) keying so first, let’s define iambic keyer operation. An iambic keyer will send an alternating sequence of dits and dahs as long as both the dit and dah switches are depressed or squeezed.
The difference between mode A and B lies in what the keyer does when both paddles are released. The mode A keyer completes the element being sent when the paddles are released. The mode B keyer sends an additional element opposite to the one being sent when the paddles are released.
You can tell the basic difference between the modes with the letter C. In mode A you could squeeze both paddles (dah before dit) and you would let go of both after hearing the last dit. With mode B, you start the same BUT let go of both paddles after hearing the second *dah*.
Slap Keying
The term "keyer" is generally used to refer to an "electronic keyer," which is a device that will generate dots or dashes depending on which of the two input switches is closed. Usually a device called a "paddle" or "bug" is used for input switching (sending). An iambic keyer is simply an electronic keyer that can be operated with a dual paddle.
Single lever keying with a bug is sometimes called slap keying since you can only depress either the dit (slap to the right) or dah (slap to the left). If you use a dual lever keyer such as an Iambic keyer only slapping to the left or right, then you are slap keying. This is fine, however, it does not utilize the "iambic" functionality of the key.
Simply put, if you don't squeeze the dual lever paddle then it will work just like a single lever paddle.
The single paddle keyer is called a bug, which is mentioned above. Users of the bug tend to use a slapping action, also mentioned above. However, those learning to use an iambic paddle are encouraged not to slap the paddles. Just a light touch is all it takes if you have it adjusted correctly. If the paddle moves around the table while you are sending then you are using too much force.
Disambiguation
An electronic keyer can support the iambic sending technique, in which case it is an "Iambic Keyer." The term Iambic has nothing to do with the paddle. Iambic sending does requires a dual-lever paddle. A bug only has one lever and therefore cannot do iambic sending. You can use an iambic keyer as though it was a bug, but a bug cannot do iambic keying.
There is a benefit to iambic keying only if the technique is adopted and the individual is skilled in the practice. Not all operators will master the iambic paddle and therefore any benefit may be impossible to perceive. It is true that fewer movements of the hand are required in order to generate any given piece of Morse code text.
Four different CW Key types exist:
- Straight Key
- Semi-Auto Bug
- Electronic Keyer
- Iambic Electronic Keyer[[Category:Radio]
