Difference between revisions of "Motorola Moto G8 Power"

Revision as of 15:59, 18 December 2020

Open Settings on your phone and go to About Phone. Tap 7 times on Build Number to enable Developer Options.
Now go to Settings > System -> Advanced -> Developer Options and enable OEM Unlocking.
Turn off your phone. Then press & hold Volume Down + Power button together
When the Fastboot screen appears, release both buttons. Once the phone boot into Fastboot mode, connect Moto G8 Power to Computer.
Go to C:\adb and replace C:\adb with CMD in the location field and press enter
Now in the command window, enter the command 'fastboot oem get_unlock_data' to get unlock code
It will display 5 line code. Copy the code and make it in one line, use notepad for convenience. Remember not to copy (bootloader) in case of windows and Info in case of Mac.
Go to Motorola unlock page and click next and login with the Motorola account.
Copy the one-line code that you just adjusted in Notepad and paste it in the Motorola unlock page.
Then click on ‘Can my device be unlocked’ and after that click ‘Request Unlock Key’ (make sure to select I Agree).

Phone has to be connected to a network, wifi is sufficient, to enable OEM Ublocking

@@ Line 12: / Line 12: @@
 #Copy the one-line code that you just adjusted in Notepad and paste it in the Motorola unlock page.
 #Then click on ‘Can my device be unlocked’ and after that click ‘Request Unlock Key’ (make sure to select I Agree).
+*Phone has to be connected to a network, wifi is sufficient, to enable OEM Ublocking