Difference between revisions of "Sonicview SV-360 Premier"

Revision as of 21:38, 28 March 2011

Part 1

Download and unzip latest bin to your USB drive
With power off, insert USB drive into USB front port on receiver
Open Menu, navigate to PVR Options, Front USB, and select the bin file from the list
Choose S/W Update. Wait while file loads and updates, be patient, do not disturb receiver or thumb drive
Reboot Yes when prompted

Part 2

Download and install Wiznet 3.0.1 to your PC (you need this or latest version)
With Sonicview on, and SVLan connected, goto PC and run Wiznet
PC and SVLan on receiver must both be connected to same LAN switch or hub
In Wiznet choose "Search" and it will find your SVLan adapter via network and show the Mac Address
Use Wiznet to set the IP address for SVLan (network settings appropriate for your LAN)
Once set click the "Settings" button next to the "Search" button

Part 3 (Skip if you see the Network Connected Message)

This step resolves SVLan network device related error
You may need to download and install Premier_svlan_special_99 (place bin on USB drive)
Goto Sonicview and load this bin, which will make the SVLan work (if you were getting a network error before)

Part 4

Press Menu; Choose System Settings; Choose Time Settings; Choose your time zone exit.
Press Menu; Choose System Settings; Choose User Options; Set all to ON Choose your local and exit.
Press Menu; Choose System Settings; Choose Parental Conrol; 0000; Set all to OFF, and ACC to Disable.

Part 5

Part 6

How To Force Load Sonicview SV-360 Premier With USB Drive

Turn the the Premier Off completely from the rear power switch
Format USB flash drive
Copy latest bin file fix to the flash drive
Insert flash drive into premier usb port
Press and hold Ok button (located on the front panel) and then turn the Premier On using the rear power switch
Select the bin file and let it load

Note: the following is theoretical, do not actually attempt this.

first load the newest channel template file

then scan sats in this order:

Tuner

 Echostar 7(119W)
 Changed LNB type to OSC-DP
 Changed Transponder to 12239
 Changed Diseqc to Port 1

Tuner

 Echostar 8 (110W)
 Changed LNB type to OSC-DP
 Changed Diseqc to Port 2

(FTAforall-Receiver-Discussion) Forum section dedicated to this receiver. These guys are real forum nazis so make sure you format your post perfectly.
(MyFreeNeeds-Sonicview360P-Discussion) Another forum section where this receiver is discussed.

Network Adapter Error!!! 
Please switch on again!!!

@@ Line 18: / Line 18: @@
 # Once set click the "Settings" button next to the "Search" button
-Part 3
+Part 3 (Skip if you see the Network Connected Message)
+# This step resolves SVLan network device related error
 # You may need to download and install Premier_svlan_special_99 (place bin on USB drive)
 # Goto Sonicview and load this bin, which will make the SVLan work (if you were getting a network error before)
+Part 4
+# Press Menu; Choose System Settings; Choose Time Settings; Choose your time zone exit.
+# Press Menu; Choose System Settings; Choose User Options; Set all to ON Choose your local and exit.
+# Press Menu; Choose System Settings; Choose Parental Conrol; 0000; Set all to OFF, and ACC to Disable.
+Part 5
+# Set up birds and scan for channels
+Part 6
+# Enter key to activate
 === Force Load Method ===