Difference between revisions of "Arecord alsa audio input testing"
From Free Knowledge Base- The DUCK Project: information for everyone
(Created page with "We can test the default audio input device, or the only audio input device on a simplistic configuration arecord -vvv -f dat /dev/null Watch while the audio input levels are ...") |
m |
||
| Line 6: | Line 6: | ||
arecord -vvv --device="hw:1,0" -f dat /dev/null | arecord -vvv --device="hw:1,0" -f dat /dev/null | ||
| − | To figure out what audio input device is at hw: card,device use the following command | + | You can display a list of CAPTURE Hardware Devices. To figure out what audio input device is at hw: card,device use the following command |
arecord -l | arecord -l | ||
The output look for "Card X" and on the same line "device X" to know the card,device combination to specify. | The output look for "Card X" and on the same line "device X" to know the card,device combination to specify. | ||
Latest revision as of 00:28, 26 March 2021
We can test the default audio input device, or the only audio input device on a simplistic configuration
arecord -vvv -f dat /dev/null
Watch while the audio input levels are displayed as a percentage.
We can specify an audio input device
arecord -vvv --device="hw:1,0" -f dat /dev/null
You can display a list of CAPTURE Hardware Devices. To figure out what audio input device is at hw: card,device use the following command
arecord -l
The output look for "Card X" and on the same line "device X" to know the card,device combination to specify.
