m |
|||
| (3 intermediate revisions by one user not shown) | |||
| Line 1: | Line 1: | ||
== Hardware Add-on Ideas == | == Hardware Add-on Ideas == | ||
| − | |||
* USB Siren Light - activated by software | * USB Siren Light - activated by software | ||
* USB Motion Detector | * USB Motion Detector | ||
| + | * Ethernet Motion Detector (IP based) | ||
== Alarm Problems == | == Alarm Problems == | ||
* Occasional cross-camera talk or flash to blue screen (which is the result of cross camera talk to an inactive camera) triggers 100% motion and sets off the alarm. | * Occasional cross-camera talk or flash to blue screen (which is the result of cross camera talk to an inactive camera) triggers 100% motion and sets off the alarm. | ||
| + | |||
| + | == Recommendations for Improved Motion Detection == | ||
| + | |||
| + | * Use a motion sensor security flood light - the activated light typically triggers near or 100% motion on the camera, and is far more reliable than trying to fine tune motion detection that will pick up an intruder versus background noise, and headlight beams reflecting from the outside. | ||
| + | |||
| + | == Control Challenges == | ||
| + | |||
| + | * CHALLENGE: Disable alarm at door before entering building | ||
| + | : Make use of command line parameters to control motion detection active status with ... Manual see page 42 of 59. | ||
Latest revision as of 15:39, 17 January 2009
Hardware Add-on Ideas
- USB Siren Light - activated by software
- USB Motion Detector
- Ethernet Motion Detector (IP based)
Alarm Problems
- Occasional cross-camera talk or flash to blue screen (which is the result of cross camera talk to an inactive camera) triggers 100% motion and sets off the alarm.
Recommendations for Improved Motion Detection
- Use a motion sensor security flood light - the activated light typically triggers near or 100% motion on the camera, and is far more reliable than trying to fine tune motion detection that will pick up an intruder versus background noise, and headlight beams reflecting from the outside.
Control Challenges
- CHALLENGE: Disable alarm at door before entering building
- Make use of command line parameters to control motion detection active status with ... Manual see page 42 of 59.