Difference between revisions of "Uniden BCD325P2 TrunkTracker V Scanner"

From Free Knowledge Base- The DUCK Project: information for everyone
Jump to: navigation, search
(Created page with "APCO-25 Phase II capable handheld TrunkTracker V scanner. It is the replacement from the previous generation BCD396XT.")
 
m
Line 1: Line 1:
 
APCO-25 Phase II capable handheld TrunkTracker V scanner.  It is the replacement from the previous generation BCD396XT.
 
APCO-25 Phase II capable handheld TrunkTracker V scanner.  It is the replacement from the previous generation BCD396XT.
 +
 +
For Conventional frequencies please follow these steps:
 +
1. Press Menu button
 +
2. Highlight Program System, Press E
 +
3. Highlight New System, Press E
 +
4. Highlight Conventional, Press E
 +
5. Confirm by pressing E
 +
6. Highlight Edit Group, Press E
 +
7. Highlight New Group, Press E
 +
8. Highlight Edit Channel, Press E
 +
9. Highlight New Channel, Press E
 +
10. Enter your Frequency, Press E
 +
11. To enter more frequencies, Highlight New Channel, Press E
 +
 +
 +
 +
For P25 (Standard Trunk), Motorolla, Edacs, LTR:
 +
 +
1. Press Menu
 +
2. Highlight Program System, Press E
 +
3. Highlight New System, Press E
 +
4. Highlight the system you need Conventional, P25, Motorolla, Edacs, LTR, Press E
 +
5. If P25 (Standard Trunk), EDACS, or Motorolla please follow the steps below:
 +
6. Highlight Edit Site, Press E
 +
7. Highlight New Site, Press E
 +
8. Highlight Set Frequencies, Press E
 +
9. Highlight New Frequency, Press E
 +
10. Type in Primary and Alternate Frequencies (red and blue frequencies on RadioReference) Press E
 +
11. Highlight New Frequency to enter more, Press E
 +
 +
Once you have entered all of your frequencies and want to enter DEC/TGID:
 +
 +
12. Press Menu 4 times.
 +
13. Highlight Edit Group, Press E
 +
14. Highlight New Group, Press E
 +
15. Highlight Edit Channel, Press E
 +
16. Highlight New Channel, Press E
 +
17. Enter in the DEC/TGID, Press E
 +
18. To enter more DEC/TGID Highlight New Channel, Press E
 +
 +
Once you have finished entering the DEC/TGID
 +
 +
19. Press Menu 4 Times
 +
20. Highlight Edit Sys Option, Press E
 +
21. Highlight ID Scan/Search, Press E
 +
22. Press E on ID Scan if using TGID's and ID Search if just using only Frequencies.
 +
 +
For P25 One Frequency Trunk:
 +
 +
 +
1. Press Menu
 +
2. Highlight Program System, Press E
 +
3. Highlight New System, Press E
 +
4. Highlight P25, Press E
 +
5. Highlight One Freq Trunk, Press E
 +
6. Highlight Edit Site, Press E
 +
7. Highlight New Site, Press E
 +
8. Highlight Set Frequencies, Press E
 +
9. Highlight New Frequency, Press E
 +
10. Enter the Frequency, Press E
 +
11. Highlight New Frequency, Press E
 +
12. Once you have all the Frequencies entered you can Press Scan
 +
 +
[[Category:Tangible Product]]
 +
[[Category:Electronics]]
 +
[[Category:Radio]]

Revision as of 18:21, 12 July 2023

APCO-25 Phase II capable handheld TrunkTracker V scanner. It is the replacement from the previous generation BCD396XT.

For Conventional frequencies please follow these steps: 1. Press Menu button 2. Highlight Program System, Press E 3. Highlight New System, Press E 4. Highlight Conventional, Press E 5. Confirm by pressing E 6. Highlight Edit Group, Press E 7. Highlight New Group, Press E 8. Highlight Edit Channel, Press E 9. Highlight New Channel, Press E 10. Enter your Frequency, Press E 11. To enter more frequencies, Highlight New Channel, Press E


For P25 (Standard Trunk), Motorolla, Edacs, LTR:

1. Press Menu 2. Highlight Program System, Press E 3. Highlight New System, Press E 4. Highlight the system you need Conventional, P25, Motorolla, Edacs, LTR, Press E 5. If P25 (Standard Trunk), EDACS, or Motorolla please follow the steps below: 6. Highlight Edit Site, Press E 7. Highlight New Site, Press E 8. Highlight Set Frequencies, Press E 9. Highlight New Frequency, Press E 10. Type in Primary and Alternate Frequencies (red and blue frequencies on RadioReference) Press E 11. Highlight New Frequency to enter more, Press E

Once you have entered all of your frequencies and want to enter DEC/TGID:

12. Press Menu 4 times. 13. Highlight Edit Group, Press E 14. Highlight New Group, Press E 15. Highlight Edit Channel, Press E 16. Highlight New Channel, Press E 17. Enter in the DEC/TGID, Press E 18. To enter more DEC/TGID Highlight New Channel, Press E

Once you have finished entering the DEC/TGID

19. Press Menu 4 Times 20. Highlight Edit Sys Option, Press E 21. Highlight ID Scan/Search, Press E 22. Press E on ID Scan if using TGID's and ID Search if just using only Frequencies.

For P25 One Frequency Trunk:


1. Press Menu 2. Highlight Program System, Press E 3. Highlight New System, Press E 4. Highlight P25, Press E 5. Highlight One Freq Trunk, Press E 6. Highlight Edit Site, Press E 7. Highlight New Site, Press E 8. Highlight Set Frequencies, Press E 9. Highlight New Frequency, Press E 10. Enter the Frequency, Press E 11. Highlight New Frequency, Press E 12. Once you have all the Frequencies entered you can Press Scan

Retrieved from "https://wiki.robotz.com/index.php?title=Uniden_BCD325P2_TrunkTracker_V_Scanner&oldid=21167"