Difference between revisions of "Sonicview SV-4000 FTA Receiver"

Revision as of 10:06, 28 March 2008

Dish Network Settings

• ! YOU MUST BE A PAID SUBSCRIBER. NEVER PROGRAM FOR CHANNELS YOU ARE NOT PAYING FOR! IT IS ILLEGAL TO PIRATE SATELLITE TELEVISION!

Settings:

LNB power          ON
LNB type           OCS-DP
LNB frequency      11250
Transponder        110=12224, 119=12239
22khz              OFF
Search option      All
Network search     ON
Diseqc             110=2, 119=1
Motor              Disable
Legacy switch      OFF

FAQ

• Q: Some channels are locked, namely, the adult content channels.

A: Go into parent control and unlock the xxxx channels. Go to system settings, parental control, enter 0000, unlock adult channels and switch ratings lock to not used.

• Q: What are all the settings I should check to make sure nothing is locked out?

A: Go to menu, sistem settings, parentel control, enter "0000", and check if: receiver lock is "OFF", menu lock is "OFF", scramble lock is "OFF", adult channel lock is "OFF", rating lock is "NOT USED".

• Q: I cant get anything in the EPG to show, the programming guide is basically blank. How do I get the EPG to work?

A: For Dish Network goto channel 239 and let it stay there for about two minutes. This works if you have the settings for 7-day EPG and Stand-By EPG set to ON. For Bell Satellite use channel 410. Another method is to turn the EPG Auto Update ON in the menu and then turn receiver off with the remote for 5 minutes and it will show full epg.

• Q: My audio is fading out or gone, how do I get it back?

A: Go into the settings and turn off Dolby Sound.