Difference between revisions of "Cisco WIC-1DSU-T1"
From Free Knowledge Base- The DUCK Project: information for everyone
(Created page with "Here is a sample configuration for a WIC-1DSU-T1 interface card. There are no controller or controller-related commands, such as channel-group, to configure. With this WIC car...") |
(No difference)
|
Revision as of 18:08, 18 July 2016
Here is a sample configuration for a WIC-1DSU-T1 interface card. There are no controller or controller-related commands, such as channel-group, to configure. With this WIC card, service-module commands are used. The syntax with regard to the framing, line-code, and so on remains the same. In this scenario a full T1 card with 24 timeslots is used. Configuration
Interface serial 0/0 service-module t1 clock source internal service-module t1 timeslots 1-24 speed 64 service-module t1 framing esf service-module t1 linecode b8zs ip address 10.1.1.1 255.255.255.0 encapsulation pppfair-que no shut
