Difference between revisions of "Uniden BCD325P2 TrunkTracker V Scanner"

Revision as of 18:37, 12 July 2023

APCO-25 Phase II capable handheld TrunkTracker V scanner. It is the replacement from the previous generation BCD396XT.

basic usage

Press the knob at the top (E) to select Volume control function before turning to set volume.

field programming

When you see [ Press E ] it means to press down on the top turn dial.

For Conventional frequencies please follow these steps:

1. Press Menu button
2. Highlight Program System, Press E
3. Highlight New System, Press E
4. Highlight Conventional, Press E
5. Confirm by pressing E
6. Highlight Edit Group, Press E
7. Highlight New Group, Press E
8. Highlight Edit Channel, Press E
9. Highlight New Channel, Press E
10. Enter your Frequency, Press E
11. To enter more frequencies, Highlight New Channel, Press E

For P25 (Standard Trunk), Motorolla, Edacs, LTR:

1. Press Menu
2. Highlight Program System, Press E
3. Highlight New System, Press E
4. Highlight the system you need Conventional, P25, Motorolla, Edacs, LTR, Press E
5. If P25 (Standard Trunk), EDACS, or Motorolla please follow the steps below:
6. Highlight Edit Site, Press E
7. Highlight New Site, Press E
8. Highlight Set Frequencies, Press E
9. Highlight New Frequency, Press E
10. Type in Primary and Alternate Frequencies (red and blue frequencies on RadioReference) Press E
11. Highlight New Frequency to enter more, Press E

Once you have entered all of your frequencies and want to enter DEC/TGID:

• 12. Press Menu 4 times.
• 13. Highlight Edit Group, Press E
• 14. Highlight New Group, Press E
• 15. Highlight Edit Channel, Press E
• 16. Highlight New Channel, Press E
• 17. Enter in the DEC/TGID, Press E
• 18. To enter more DEC/TGID Highlight New Channel, Press E

Once you have finished entering the DEC/TGID

• 19. Press Menu 4 Times
• 20. Highlight Edit Sys Option, Press E
• 21. Highlight ID Scan/Search, Press E
• 22. Press E on ID Scan if using TGID's and ID Search if just using only Frequencies.

For P25 One Frequency Trunk:

1. Press Menu
2. Highlight Program System, Press E
3. Highlight New System, Press E
4. Highlight P25, Press E
5. Highlight One Freq Trunk, Press E
6. Highlight Edit Site, Press E
7. Highlight New Site, Press E
8. Highlight Set Frequencies, Press E
9. Highlight New Frequency, Press E
10. Enter the Frequency, Press E
11. Highlight New Frequency, Press E
12. Once you have all the Frequencies entered you can Press Scan