Electrical Test Equipment: Difference between revisions

From Free Knowledge Base- The DUCK Project
Jump to navigation Jump to search
New page: == Electrical Test Equipment Suppliers == * Hoyt Electrical Equipment - http://www.hoytmeter.com/ * Test Equipment Depot - http://www.testequipmentdepot.com/   [[Category:Electrica...
 
mNo edit summary
Line 1: Line 1:
== Determine Current Draw of AC Electrical Circuit ==
#Find the data plate on the device you are trying to wire.
#Find the section labeled FLA or LRA, this is the full load. In many instances, the load will be expressed in watts, IE 3800 watts FL.
#Divide the wattage by the voltage of the circuit, in the USA usually 120 0r 240.
#The result is the amperage the device draws.
#Multiply by 1.25, the National Electrical code requires protection at %125.
#Install circuit breaker to meet that size. Standard branch circuits like lighting require 15 amp. Appliance circuits, IE kitchen, require 20 amp.
== Electrical Test Equipment Suppliers ==
== Electrical Test Equipment Suppliers ==


* Hoyt Electrical Equipment - http://www.hoytmeter.com/
* Hoyt Electrical Equipment - http://www.hoytmeter.com/
* Test Equipment Depot - http://www.testequipmentdepot.com/
* Test Equipment Depot - http://www.testequipmentdepot.com/
* Advanced Test Equipment Corporation - http://www.atecorp.com/


 
 


[[Category:Electrical]]
[[Category:Electrical]]

Revision as of 09:14, 12 November 2008

Determine Current Draw of AC Electrical Circuit

  1. Find the data plate on the device you are trying to wire.
  2. Find the section labeled FLA or LRA, this is the full load. In many instances, the load will be expressed in watts, IE 3800 watts FL.
  3. Divide the wattage by the voltage of the circuit, in the USA usually 120 0r 240.
  4. The result is the amperage the device draws.
  5. Multiply by 1.25, the National Electrical code requires protection at %125.
  6. Install circuit breaker to meet that size. Standard branch circuits like lighting require 15 amp. Appliance circuits, IE kitchen, require 20 amp.

Electrical Test Equipment Suppliers