Difference between revisions of "TRRS Phono Plug"
| Line 48: | Line 48: | ||
There are an array of adapters available to resolve the various incompatibilities in plug and jack size, as well as competing wiring conventions. Another issue created by Apple (typically the culprit) is the depth of the jack on the device. Originally the Apple iPhone had a jack that was recessed unusually deep in the device, so that regular TRRS or TRS jacks wouldn't fit all the way in. An adapter is available which allows you to fit a regular headset into the recessed area. There's adapters to allow a male Mini Phono to plug into a Sub-Mini jack. There's even an adapter to swap the last ring and sleeve connection around to iPod headsets will work with devices in the Nokia convention, and vice versa. | There are an array of adapters available to resolve the various incompatibilities in plug and jack size, as well as competing wiring conventions. Another issue created by Apple (typically the culprit) is the depth of the jack on the device. Originally the Apple iPhone had a jack that was recessed unusually deep in the device, so that regular TRRS or TRS jacks wouldn't fit all the way in. An adapter is available which allows you to fit a regular headset into the recessed area. There's adapters to allow a male Mini Phono to plug into a Sub-Mini jack. There's even an adapter to swap the last ring and sleeve connection around to iPod headsets will work with devices in the Nokia convention, and vice versa. | ||
| + | |||
| + | A final layer of complication involves the use of voltage fluctuation device control schemes to manipulate audio devices such as skip, play, or pause the playback of music on an iPod or iPhone from a hands free device. Both Android and Apple devices have music control via the phono jack. The Tip and first ring are not impacted. Control is typically accomplished by voltage applied to the microphone connection, which is sleeve on some Android devices. Incompatibilities exist between Android systems, Apple iPhone systems, and 3rd party manufacturers. This is mostly the fault of Apple for refusing to utilize an existing convention. | ||
| + | |||
| + | === Video Devices === | ||
Revision as of 09:59, 31 January 2013
This audio jack is similar to the TRS Phono Plug, with the exception that there is an additional ring, resulting in a Tip + Ring + Ring + Sleeve configuration. The TRRS phono plug facilitates the addition of another connection since there are 4 contact places on the jack separated by three insulation layers. The two most common applications today for the TRRS phono plug in Mini Phono is for video camera recorders and mobile audio devices including the iPod, iPhone, and Android phones.
Polarity
Audio Devices
The most common audio device application for the TRRS connector is the microphone + headphone headset. The stereo headphones include a microphone for use with modern mobile phones, such as the Motorola Droid. These hands free headsets utilize the additional contact on the jack for the microphone, and share a common ground.
Unfortunately, there are competing conventions for the contact assignment of these TRRS phono plugs. The original convention has been established for decades and was adopted by Nokia for their mobile phones for hands free headsets. For the purposes of identification it will be referred to as the Nokia convention.
| Tip | Left Audio |
| Ring | Right Audio |
| Ring | Microphone |
| Sleeve | Ground |
Then along came Apple with their iPod and iPhone audio devices. Rather than accepting an existing convention, Apple created chaos for device manufacturers by swapping the microphone and ground connections.
| Tip | Left Audio |
| Ring | Right Audio |
| Ring | Ground |
| Sleeve | Microphone |
By preserving the left and right audio convention it allows the use of standard TRS headphones on apple devices. Although connecting TRS headphones does short the ground and microphone connection, it reportedly does no harm and full stereo audio is available in the headphones.
Older cellular phones utilizing a TRRS jack utilized the Nokia convention, and were Sub-Mini Thirty-Second (3/32) sized jacks. Then the Sub-Mini was phased out in favor of the more common Mini Phono (1/8) jack. Android, Blackberry, and iPhone all currently utilize the Mini Phono size, although the wiring configuration has two competing conventions.
There are an array of adapters available to resolve the various incompatibilities in plug and jack size, as well as competing wiring conventions. Another issue created by Apple (typically the culprit) is the depth of the jack on the device. Originally the Apple iPhone had a jack that was recessed unusually deep in the device, so that regular TRRS or TRS jacks wouldn't fit all the way in. An adapter is available which allows you to fit a regular headset into the recessed area. There's adapters to allow a male Mini Phono to plug into a Sub-Mini jack. There's even an adapter to swap the last ring and sleeve connection around to iPod headsets will work with devices in the Nokia convention, and vice versa.
A final layer of complication involves the use of voltage fluctuation device control schemes to manipulate audio devices such as skip, play, or pause the playback of music on an iPod or iPhone from a hands free device. Both Android and Apple devices have music control via the phono jack. The Tip and first ring are not impacted. Control is typically accomplished by voltage applied to the microphone connection, which is sleeve on some Android devices. Incompatibilities exist between Android systems, Apple iPhone systems, and 3rd party manufacturers. This is mostly the fault of Apple for refusing to utilize an existing convention.
Video Devices
