Difference between revisions of "Blue Button Remote for Dish Network"
From Free Knowledge Base- The DUCK Project: information for everyone
(New page: == Change Remote Control Address == == Control Other Devices == You may want to program your remote to control other devices such as your television or VCR. # Find the brand of the de...) |
|||
| Line 1: | Line 1: | ||
| + | [[File:dishnetbluebuttonremote.jpg]] This remote is designed to work with the model 301 and 311 receivers, but will work with virtually every model of Dish Network Receiver. | ||
| + | Features: | ||
| + | |||
| + | *Four-function remote control | ||
| + | *Will operate up to four devices: satellite receiver, TV, DVD, VCR, sound system, etc. | ||
| + | *Emits IR (infrared / line-of-sight) signal | ||
== Change Remote Control Address == | == Change Remote Control Address == | ||
Revision as of 18:13, 12 April 2013
This remote is designed to work with the model 301 and 311 receivers, but will work with virtually every model of Dish Network Receiver.
Features:
- Four-function remote control
- Will operate up to four devices: satellite receiver, TV, DVD, VCR, sound system, etc.
- Emits IR (infrared / line-of-sight) signal
Change Remote Control Address
Control Other Devices
You may want to program your remote to control other devices such as your television or VCR.
- Find the brand of the device to get the program code.
- Press the button for the device on the remote (like the TV or VCR button at the top)
- Hold that button down for 3 seconds or more until all mode buttons light up
- Use number buttons to enter code for the device
- Press the # Pound button.
- If the pound button blinks 3 times then it took the code.
note: When programming the AUX button you must enter an additional number before entering the device code.
0 - code for a second TV 1 - code for a second VCR 2 - for additional electronic device such as Amp
To change a code or correct an entry start with step 3.
